Choosing Upvc Window Replacement Hinges

Selecting and fitting upvc windows replacement hinges isn't as difficult as you think. It is crucial to ensure that the arrow on the hinges is facing the correct way and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are many different kinds of hinges to pick from, each with distinct characteristics. This article will go over the most popular uPVC hinges and their benefits.

Egress/Easy Clean Hinge

They are a great option to replace or upgrade your fire escape window because they can open to a full 90-degree angle. They can be closed to an easy-clean position which allows you to get access to the outside of windows without the need to climb ladders or lean at risky angles.

These heavy duty egress hinges are manufactured by Yale one of the most popular and reliable home security brands available today. These hinges can be used with any kind of uPVC side-hung windows. They can be moved to the clean position by pressing the small button and sliding the window sash over to one side. Once closed, the window sash will revert to its original position.

They are available in 13mm and 17mm stack heights. Based on the size of your existing window, we recommend using our Egress Selection Guide to determine which one is the best fit for your needs.

These hinges can be used with standard side-hung frames made of aluminum or uPVC. They are fitted with a simple friction screw to adjust the amount of resistance that is generated. This makes it easier to open the window and reduces the risk of a mishap during high winds. They have been tested for more than thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to operate and doesn't have any buttons or catch. It offers a convenient and safe solution for emergency exit tilt and turn window hinge covers cleaning. Firstly, open the window to the egress (full opening) position, and then press the hinge retaining clip that is located on the inside of the bottom corner. This will open the bottom and top catches and allow you to move the sash back into the clean position. Close the window after you are in the easy-cleaning position. This will set the hinges back to their Egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also called "Easy Clean") are used to replace windows with side openings to ensure fire safety. These hinges allow for a larger opening in the event of fire. This kind of hinge is a legal requirement in any living space that has windows, as stipulated by building regulations.

They feature a unique friction stay that allows the window to be opened to 90 degrees and also allows the sash opening to slide across the glass when it is open to allow easy cleaning of the exterior side of the glass without having to climb ladders. The hinges aren't flimsy buttons or catches, and are operated with a simple, secure lever that can be accessed from inside the home.

The hinges are manufactured in the UK by Cotswold and come with a child safety restrictor for use throughout the day that can be reverted with a hidden button, giving you peace of thought that your children won't accidentally open the door too far. The stack heights are 13mm or 17mm.

Measure the length of the current side-hung window hinge that is fixed to the frame. (See the guide for measuring the size of Upvc window hinges). Then select the correct size hinge from the choices below.

It is important to note that the measurement is taken from the part that fixes to the frame and not the sash, the actual hinge length could be longer or shorter depending on the manufacture of your old windows. When choosing the width of the hinge, most frames made of upvc will have the 13mm stack height however if your original window frame has 17mm, choose this option. Alternately, you can install the 4mm packer to make up for the difference. All hinges come in two different directions (1 left and one right). The hinges are not equipped with screws. If required, these screws can be purchased separately. Our upvc window repair screws are recommended. These are specially designed to improve the performance of your hinges, allowing them to operate smoothly for longer. They have a reduced-friction design and an enhanced weather seal that includes an encapsulated nylon reducer cap.

Restricted Hinge

There are times when windows must open fully and this can be a problem using the standard hinge. The restricted child safety friction hinges are a solution to this problem and offer a fantastic solution when ventilation is required but access for cleaning or escape in case of fire is not possible. They limit the possibility of opening the sash, and permit the override of this restriction by pressing the button. They are suitable for both top and side hung windows and are available in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction Hinges combine the benefits of a standard restrictor, and a fire escape pivot to provide a simple and efficient method of complying with building regulations. It is suitable for side hung and top opening uPVC windows and comes in 13mm and 17mm stack heights. It is available in two pieces, with one hinge being the one that is restricted for egress, and the other the unrestricted. This permits one hinge to be installed at the bottom and the other is installed on top.

These uPVC restrictive hinges have been tested to BS6375 Part 2. They are intended for use on a window that cannot be opened fully like a small children's bedroom. The mechanism restricts the amount the sash can open to 100mm for safety and re-engages once the window is closed.

These uPVC friction-style hinges can be used with all types of windows. They are particularly suitable for windows that are difficult to reach, like those in three-storey houses or those that require the use of a ladder. They can be upgraded by our security features, including hinge guard protection plate or dog bolts to attain PAS 24 performance.

When replacing a window hinge, it is crucial to determine the length of the current hinge so you can get replacements that are comparable in size. The most efficient method to do this is by viewing the hinge in the gallery and determining the best place for it to be positioned. The top-hung hinges can only be positioned on one side, whereas the side hung hinges can only be positioned on one side.

Standard Hinge

Standard hinges feature metal-to-metal contacts and do not require additional components to reduce friction. It comes in a variety of finishes and has a fire rating. To quickly determine the radius of hinges, lay it out flat and align a quarter and dime in two corners. If the dime fits better and the corner is round by 1/4 inch. If the quarter fit better, it's rounded to 5/8 inch.

Choosing the right type of hinge can be the difference between making or breaking the appearance of your door. It's essential to match the style and finish of your fix door hinge with the hinges to create a unified design that is both functional and visually attractive.