Sliding Patio Doors Repairs

Your sliding glass patio doors help bring natural light and improve your home's energy efficiency. In time, they might begin to show signs that suggest some maintenance.

The majority of problems with sliding wood patio door repair doors are relatively easy to repair. Find out how to keep your sliding patio doors looking and working like new.

Tracks that are dirty or damaged

The tracks of your sliding patio door could be filthy or blocked. Over time, the dust and grime of daily use accumulates on the track and can cause the door to jam or even collapse completely.

A regular cleaning of sliding doors and tracks as part of your household chores can help to reduce the amount of build-up. Begin by sweeping or vacuuming any large debris off the tracks and then wipe them clean using warm water and a non-abrasive cleaner like dish soap. Add a little vinegar to your cleaning solution may help in removing stubborn grease and dirt staining.

If your sliding door isn't able to move smoothly after completing these steps, it could be the sign of more severe damage and requires a professional repair or replacement. There are a few easy fixes you can do before calling in professionals to avoid expensive repairs or replacements.

It is important to put a doormat near the bottom of your sliding doors to keep dirt out before it has the chance to reach the tracks. Also, you should trim any plants or bushes near your sliding doors to reduce the amount of debris trapped in the tracks. Finally, be sure to close the door properly so it doesn't crash into the tracks and cause damage to the rollers and wheels. You can extend the life of your doors by keeping them clean and well-lubricated.

Rollers that are not aligned

Sometimes, a patio sliding could be misaligned. Most often, this is due to dirt or other obstructions that can be easily removed. But sometimes it can also be the result of a bent track or roller. In this case you can straighten the rollers by taking them off with the adjustment screws, and then cleaning with ruby alcohol. Be cautious because these parts are delicate.

If your doors are still stuck, you can grease the rollers. This will lessen friction and allow them to slide more easily. It is recommended to apply a silicone-based lubricant since petroleum-based ones tend to draw dirt more quickly. It is also important to clean the tracks and rollers before applying lubricant.

After cleaning the rollers you can put them back on using their adjustment screws. Use the same lubricant that you used to clean them. When you are reinstalling the rollers ensure that you push them all the way into their channels. You can then test your door to determine whether it slides more effortlessly.

If the problem persists it is possible to take the door off and check the tracks and rollers. If the wheels or tracks are bent badly they may require you to replace them. In this case, it's a good idea to contact a professional for the installation.

Warped Glass

Sliding glass doors are ideal for bringing the outdoors and natural sunlight into a room, but they are also susceptible to damage that requires repair or replacement. Some of the most common problems that occur include cracking, warping and fading. The materials used to make the sliding glass patio doors start to degrade when exposed to sunlight, heat and other environmental factors. Cracking is often caused by impact damage such as a lawnmower or ball smacking into the door. Fading typically occurs due to repeated exposure to sunlight as well as other elements.

If your sliding patio door repair service doors aren't easy to open or close it could be a sign that the tracks and rollers are not functioning correctly. This problem may be caused by accumulated dirt, rust, or debris in the wheels or track, or by a lack or lubrication. Cleaning the tracks and rollers, removing obstructions and applying silicone spray may help solve this issue.

Another reason your sliding patio doors may be difficult to open or close is that the locking mechanism is no longer working. It could be caused by misalignment, wear and tear, or an amalgamation of both. To fix this, simply adjust the locking mechanism by turning the adjustable screws located at the bottom.

Drafts or air leaks around your sliding patio door are a common issue that can affect their energy efficiency. They usually result from damaged weather stripping and an improper alignment of the door that is easily fixed by replacing the weather stripping and re-aligning the doors.

Loose Handle

It can be quite frustrating when the handle of sliding doors becomes loose. It makes it difficult to open. This is typically caused by an incorrectly aligned locking mechanism which can be fixed by loosening the screws that secure it and tightening them until they are snug against the jamb of the door.

Another reason for a loose handle is that it has become detached from the spindle that connects the handles' exterior and interior. This is usually the result of a mix of factors, including excessive use wear and tear or simply aging. If the issue isn't addressed quickly, it could eventually lead to the whole handle becoming loose and potentially falling off entirely.

To resolve this issue, you should first locate the screws that connect the handles' exterior and interior. They are usually hidden by plastic tabs, which can be removed with a flathead screwdriver (or in the case of certain handles, a Phillips head screwdriver). It is a good idea to store these screws somewhere safe so that you don't lose them.

Once the handles that were previously used have been removed the next step is to remove the spindle that is loose. This can be done by tapping on the end with a hammer or mallet until it is free of its position inside the door. The new handle is then installed by inserting the spindle into the hole for the handle inside and the other end into the exterior handle hole. Once the handle is in place it can be tightened by screwing the screws back into place and then examining to confirm that the locking and unlock mechanisms function properly.

Unusual Weatherstripping

A cracked or worn weatherstripping could let water and air be able to seep through your patio doors, which can compromise the comfort and energy efficiency of your home. In addition to letting in moisture, it could also cause drafts and increase your heating or cooling costs. It is good news that replacing damaged weatherstripping is a simple repair that doesn't require professional help. First, you must take off the old stripping by loosing its staples with a screwdriver or prying it gently using a putty knife, and then taking it off the door. Then, you can wash the area and apply a fresh layer of weatherstripping that is backed by a foam seal that helps stop leaks and improve comfort.

If your sliding patio door repair company doors are no working as they should, it's crucial to fix the issue as soon as possible to avoid further damage and keep them functional for years to come. Depending on the nature of the problem, DIY or professional repair/replacement may be the best choice.

The majority of sliding patio door issues are caused by dirty rollers, faulty tracks, or a loose handle. In the majority of instances these issues can be addressed with regular maintenance and cleaning, including oiling the track, adjusting the rollers and tightening the hardware. If these methods are not working then you should seek professional advice in order to ensure that your patio is operating as it should. Review the warranty information before you decide to repair or replace your patio door. This will save you money in the future on repairs and replacements.