Patio Door Lock Repairs

Over time, patio glass repair near me doors undergo wear and tear that can result in lock malfunctions. There are a few easy steps you can take to ensure the security of your uPVC door.

These quick fixes will ensure your home is secure, whether you realign the lock or clean the mechanism.

Clean the Lock

While patio doors are an excellent way to let the outside in and keep the elements out however, they can also pose security risks when your lock isn't functioning as it should. Over time, wear and tear, hot and cold weather dirt, and other debris can cause your patio door lock to become difficult to operate. With a little care, you can make sure that the lock on your patio door always works correctly.

It is essential to first clean the patio Door lock repair door lock and all moving parts. This will help get rid of any coatings or dirt that could be preventing your lock from functioning effectively. Begin by wiping the moving parts of the lock for your patio door using a damp cloth. then employ a scouring pad or rough damp cloth to scrub the hard-to-reach areas of the door or frame that are ingrained with dirt. Then wipe the lock with a dry towel to remove any remaining moisture. Let it air dry before you use it.

If your patio door is equipped with pin-tumbler latches, you can apply powdered Graphite to the key. You can also apply a Teflon oil like WD-40 Multi-Use Product. This kind of lubricant can be applied with ease and doesn't dissolve over time. If you're unable to find an appropriate lubricant, you might use a pencil with an extremely thick tip. Insert the pencil in the lock, then shake it to distribute the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors free from dust, dirt and debris. They are particularly susceptible to snow, ice, and other debris that could cause them to jam or bind. This can make it difficult for your patio screen door repair door to open and shut.

Clean the track rails and rollers of sliding patio doors by removing weather stripping that is dirty or damaged. Clean it and replace it. The rollers for patio doors can be cleaned and sprayed with an oil that is non-stick.

Lubricate the moving parts

uPVC French Doors, similar to sliding patios, are operated by using 3 to 4 or occasionally 5 point locking mechanisms. They include the lock cylinder and handle that is operated with a key. These doors also require maintenance, including lubrication of the moving parts. This can be done using an oil that is thin but not WD40. It is recommended to do it at least once a year.

If hinges that are sagging don't cause the problem it could be because the door is not aligned. It may be rubbing or catching the strike plate's opening in the frame. The solution is to remove the strike plate and then use an abrasive chisel, which will enlarge the mortise it sits in. This lets the latch sit properly in the hole and avoids rubbing or catching on the frame.

Once the cylinder is cleared of the way take a measurement of its width using an object or a piece of wood that fits into the gap between the adjustment screw and the lock. The outer dimension is measured from the outside of door to the center of cylinder. The inner dimension is measured from the center adjustment screw to the end of the cylinder.

Check the lock's width

If your patio door latch isn't able to turn, even after oiling and cleaning it could be because it's not aligned with the strike plate. Make sure that your door is balanced, and if the hinge screws are secure. In most cases, however, simply moving the strike plate downwards or upwards could fix the problem.

The latch might not work properly when the strike of the lock is not large enough. In this instance you'll need to expand the hole using the hammer or chisel and then test the latch to ensure that it connects to the strike plate smoothly without rubbing against or getting caught on the door's frame jamb.

Before purchasing a new lock, first determine the mortise type of lock you have. You can do this by looking at the faceplate on the lock and noting if it is square or round. Then, take a look at the screw holes in the existing lock and note the dimensions of each one. This will enable you to find an alternative lock that is exactly the same size and will fit into the hole you have already.

In addition to identifying the current mortise lock you'll also want to inspect it for any nicks or bends that may need repairing. A damaged or bent latch is more likely to break than one that's been utilized often, so make sure to replace the lock with a brand new secure and safe version when you spot any indications of damage or wear.

Once you've inspected the lock and determined which type of replacement you'll need then it's time to begin working on the actual repair. Take the old handle and spindle from the patio door, and then insert the new one. Start by putting in the handle inside by aligning it with the spindle, and then securing it in place by using the two screws or bolts which hold it. Install the exterior handle following the interior handle. After you've completed these steps check the handles to make sure they open and shut easily and that the latch works correctly with the strikeplate.

Check the Strike on the door.

The door latch and strike plate are the two parts of the lock that work together to ensure that the latch locks the door. A misaligned strike plate or door latches can cause the latch to not latch the door correctly. This problem is usually very easy to repair patio doors.

Check the receiving holes of the strike plate to make sure they are free of obstructions like dirt or plastic plugs. Remove the screws that hold the strike plate. This will allow it to move horizontally, but not separate it from the frame. Then adjust the strike plate to ensure that its holes for receiving are aligned with the latch hooks on the door latch. After the strike plate is adjusted then tighten all screws, and check whether the door closes smoothly.

Door strike plates can be a bit difficult to access for homeowners who have sliding patio doors, but they are essential to lock and unlock your door. The metal plates are situated between the top and bottom jambs of your door, where they serve as the support for the latch. The door latch slides onto the strike plate and forms the seal. If the strike plate has been damaged, rusted, or is not installed correctly, the latch may not be able to lock the door properly.

A misalignment of the strike plate and latch is the most common reason for the patio lock not to close or stay. This can be verified using the "lipstick" test. Apply a little lipstick across the edge of the deadbolt, then cover it with masking tape. The lipstick will leave the mark when you close the door. This will reveal exactly where the latch connects to the strike plate. If the mark is too high or low you can alter the strike plate.

If your patio door locks for sliding aren't working correctly they can help keep your home secure from intruders. You must resolve this issue as quickly as possible. Follow these steps to fix your patio door lock and restore its function.