How to Replace a Kia Sportage Replacement Key

For a number of Kia models, the key contains an integrated keyless entry system. The key can be compared to a remote control and can be exchanged with a new one from a Kia dealer or a locksmith.

Key fobs might stop working for several reasons, including the battery of the coin is dead, worn buttons or buttons, water damage, signal interference, and a defective receiver module. Here are some helpful tips on how to get your Kia Sportage replacement key back to working.

How do you replace the remote key or smart key

No matter if your Kia comes with an intelligent key, remote key, push-to-start key, or regular metal non-transponder key, the battery in these keys will eventually require replacement. This is especially in the event that your car displays a message telling that the remote or smart key has low battery power.

This is a relatively simple process. In order to replace the battery in the key fob remove the mechanical key from the slit in the back of the key fob. Then break the cover. A small screw will be inside the key fob to hold the battery in its place. Utilizing a small screwdriver take the screw off and remove the old battery. Then, insert the new and close the slit in the key fob.

Test the key fob by pressing the lock and unlock buttons. If the doors unlock and lock exactly as you expect, then you're in good shape! You can now utilize the hands-free lock/unlock feature on your kia stonic key battery replacement when your fingers are cold or you have to go on errands around Brandon.

Note: Certain key fobs could need to be programmed (transponder chips or smart keys). This requires a machine for programming that is available only to the locksmith who works for the automotive dealer. Other keys (non transponder keys made of steel) are not required for programming. If you want to change the programming of your key, it is necessary to note the key code number on the key code tag.

How to replace a battery

If the Kia key fob is unable to respond when you press the lock/unlock button, it is likely that the battery is insufficient. A battery that is not functioning properly can cause other issues, like the check engine light flashing or the engine not turning correctly. It is easy to replace the key fob battery with just two tools.

Make sure you turn off your vehicle and shut all doors prior to starting. Find the small, metal or plastic piece at the bottom of the key fob. Then, jiggle it until the metal key is released. Then, you can insert the key in the handle on the door of your driver to unlock your car.

To replace the key fob battery, remove the cover at the rear and use a pry bar tool to remove the latch holding the black negative battery cable. Take the old battery out, and then position the new battery to ensure that its "+" side is facing you, and the "-" negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into place with care to avoid using too much force to avoid damaging or bending the contacts of the metal.

After you have installed the new battery after which you turn the key fob on and off in the ignition until the door locks up. Then you can test your Kia key fob to determine if it is working properly again.

How do you replace a keyless keys

You can have an ordinary keyfob or Smart Key based on the model of Kia Sportage. The smart key is equipped with an embedded mechanical key blade unlike the standard key fob, which does not. Both key fobs contain batteries that eventually require replacement. This is an easy process which takes just two minutes.

Before you get started it is essential to ensure that you are on a flat surface with good lighting and that your kia carens key fob is off. Keep in mind that the fob has small pieces that could fall when you're not careful.

The first step is to locate the small release button that is located on the back of the lower part of the fob. It will be either an oval silver button or a rectangular slot. You can open the key fob by pressing the button.

Once you have the key fob opened and you are able to take out the old battery and replace it. The new battery is C2032, and can be purchased through the internet or at a local auto parts store. When you are done it should be possible to lock and unlock your vehicle with your key fob - even if the engine isn't running!

How do you replace a broken mechanical key

The Kia keyfob is a great convenience that allows us to lock or unlock our car simply by pressing one button. But, as with all devices it may have issues from time to time. There are steps that can be taken to fix these issues and keep our key fobs in good working order over the long haul.

One of the most frequent issues is a low or dead battery. This could cause your device to stop working or work intermittently. If this is the case, try replacing the battery with a new one.

If this isn't enough to solve the problem, use a flathead screwdriver standard to push the plastic casing of the fob open. Be sure not to damage any internal components, or scratch the plastic. Once the battery is removed and replaced, you can replace it with a brand new one.

Close and open the door using the mechanical key. (Every kia remote key fob comes with a spare mechanical key which will fit into the slot). Test the key fob and make sure it is working correctly. Contact a dealer locksmith to fix the issue in the event that the key fob is not working. Make sure they cut you an emergency key that functions in all the trunk and door cylinders, to avoid lockouts again.