Pellet Stove Furnace

Pellet stoves can be used as a supplemental heating source or, with proper venting, as a primary heating option. They can be purchased in freestanding units as well as fireplace inserts that give your home the appearance of an old-fashioned wood-burning fireplace.

The auger carries pellets from the hopper into the combustion chamber where they are ignited and generate heat. Sensors detect the fire and adjust its rate of operation to ensure your desired room temperature.

1. Energy Efficiency

Pellet stoves burn a sustainable non-toxic fuel composed of compressed sawdust and wood chips. They also contain bark and other materials that are normally put in landfills, but can be repurposed into a clean and efficient source of heating. As a result, they can help homeowners reduce their energy consumption and reduce greenhouse gas emissions. Many people who use pellet stoves report that they can recoup their initial investment in a few short years by reducing their heating bills.

Pellets are highly compressed and are more dense than natural wood, which makes them more efficient to burn. They also produce less creosote compared to traditional wood-burning fires. They are also packed in plastic bags that seal out moisture and require less frequent cleaning.

Pellet stoves, as with other heating systems need to be sized and vented properly. A skilled technician will be able to evaluate your space requirements and venting requirements in order to get the most efficient results.

During installation the hearth is constructed according to your specifications and the vent is installed through an opening that is cut into the siding of your home. The vent can be run through a sidewall or roof depending on your preference and the local laws.

After the vent and hearth are completed, the pellet stove may be connected. Certain manufacturers offer an electronic remote control that makes it simple to start and maintain the fire, while others provide additional sensors to check airflow and combustion as well as flue temperatures and pressure. When the system detects it needs more pellets or less, it signals to the auger that it should accelerate or slow down according to the need.

All stoves have a storage container that can hold between 35 and 130 pounds of pellets. The size of the hopper will determine how often you'll need to replenish your stove. Larger hoppers allow for longer periods before a refill is needed. A grille draws air from the room, passes it through the heat exchanger and then blows heated air through the living area through convection. A grate or auger distributes the pellets, and a pan underneath will collect any unburnt ones along with combustion residue.

While pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electricity-powered heaters. Electric components that drive motorized parts of the stoves require an electrical supply. This could cause an issue in the event of power outage, though backup systems like generators and batteries are readily available.

2. Low Maintenance

Pellet stoves are extremely efficient, but they need some care to function properly. Cleaning your stove and its exhaust vent on a regular basis will help prevent the accumulation of harmful creosote. This can cause a fire or explosion that can damage your stove and/or house.

A pellet stove burns natural particles made of wood or other materials (like nutshells, corn kernels or small pieces of wood scraps). The pellets are introduced into the combustion chamber via an auger powered with electricity. The rate at which the pellets are fed to the burner is controlled by the thermostat you set. The fire can continue to roar, or it can be decreased or even extinguished in accordance with the temperature you set. When the fire goes out the ash is thrown into an empty ash tin beneath the burner that can be easily removed and disposed of.

Pellets are made from waste products that could have been discarded when processing lumber. They are a renewable resource and emit much less dust into the air than traditional wood-burning stoves, resulting in a very clean burning heat source. The amount of carcinogens, carbon monoxide and other harmful chemicals that are released from pellet stoves are also much lower than the newer EPA certified wood stoves.

Due to the low emissions the stoves are not required to be vented through chimneys like traditional wood stoves however, they should be vented through a wall or an exterior structure. Pellet stoves come with flue ports that open on the rear or top of the appliance and are connected to the vent pipe which extends outside of the home.

One drawback of a pellet stove outdoor stove is that you have to purchase or store enough pellets to last through the winter time. On average, pellet stoves vs wood stoves stove owners consume three tons of pellets during the course of winter season at a cost of $200 per ton. The costs can will increase over time, but it is cheaper than purchasing and hauling firewood to an old-fashioned wood-burning fireplace or stove. You should purchase enough pellets to ensure that your stove can run through the winter's coldest months. Also, you'll require a location to store the pellets (preferably cool and dry).

3. Reduce Carbon Footprint

Pellet stoves produce heat using renewable biomass fuel, which reduces reliance on finite fossils fuels. This contributes to a reduced carbon footprint and helps diversify the energy sources used in homes.

The emissions of pellet stoves are much lower than woodstoves, even newer EPA-certified ones. The emissions of pellet stoves are also lower than those of gas furnaces. Pellets are made of wood, sawdust and other lumber waste. They can also be composed of different materials including corn, soybeans, nutshells, cherry pits, and agricultural waste. When they are burned, they release less particulates (leading to respiratory problems and allergies), carcinogens and carbon monoxide as well as nitrous oxides.

The major difference between the wood stove and the mini pellet stove stove is the feed system. outdoor pellet stove stoves come with hoppers that contain the pellets. When the thermostat or sensors suggest that the room requires heating, the auger is turned and the pellets are pumped into the combustion chamber where they burn and generate heat. The air that is released from the combustion chamber flows through a heat exchanger which transmits the heat to the blower and then out into the room. This process produces very low emissions, and creosote is not formed.

After the hopper is empty, the ash is removed by a cyclone, and it is then deposited into an ash container. The stove also features an air circulator to move the warm, clean air into the living space. Most pellet stoves are made to be maintenance-free and feature a large viewing space for you and your family to enjoy the flames.

The quality of pellets is the main factor that influences the emissions from pellet stoves. Poor-quality pellets produce more emissions. When selecting your pellets, make sure they're certified to meet specific standards and don't contain other ingredients, such as petroleum products or urea. Look for a company that offers a guarantee and will replace or repair parts in the event of a malfunction. If you want to take the greener route, some states allow homeowners to get a tax credit when installing pellet stoves. This is a great way to reduce the initial cost of this type of stove and make it more affordable to set up.

4. Reduced Noise

Pellet stoves emit very little smoke or exhaust compared to fireplaces with wood burning. A fan is used to spread heat more evenly across the room. This is a major reason why pellet stoves require less maintenance than wood stoves. While wood stoves have to be cleaned regularly of dust and chemicals pellet stoves need a specialized metal vacuum cleaner for routine cleaning.

Many manufacturers have made a conscious effort to design their stoves to be easy to install and to operate as well as maintain. Their appliances come in different styles to are designed to match the decor of your home. Some come with a programmable thermostat, remote control and WIFI apps that let you manage and monitor your stove from any location in the world.

Most pellet stove dealers near me stoves have a large fuel hopper that can accommodate between 35 and 130 pounds of pellets. The pellets are then fed into the combustion chamber via an auger. The speed at which pellets are fed to the burner determines how hot the fire is as well as the amount of heat it produces. The hopper may be filled with hardwood pellets, composed of dense wood species such as oak and hickory or softwood pellets. Many stoves can even burn alternative biomass pellets, like those made from switchgrass or corn that can be an eco-friendly option.

Pellet stoves produce less smoke and require less maintenance since they burn a less polluting fuel than wood-burning fireplaces. They also don't require a chimney, which makes them a better option for new construction or retrofits.

In contrast to wood stoves, which require regular maintenance to be free of creosote and other chemicals, pellet stoves only need to be periodically inspected to ensure proper operation and maintenance. Depending on the model, this might include regular inspections and cleaning of the accumulation of Ash or "clinker," as well as the motor and fan. Your appliance dealer can provide the correct procedures for your specific model and brand. He can also assist you to determine the right fuel for your stove, and give information regarding storage and safety.