replacement handles for upvc windows UPVC Door Handles

You can find the ideal handle for your door, whether you are replacing your existing handles or adding extra security. These handles made of upvc are easy to install and will meet the 92mm minimum center distance of multipoint locks.

The most important measurements to be considered are backplate fixing centres and key hole dimensions for levers and levers. Check these carefully against your current measurements prior to ordering.

Lever/Pad

Lever pad handles are made up of a lever on one side and a handle that is shaped like a paddle on the opposite. They are designed to be used with key wind locks. However they can also be attached to multipoint split spindle door locks.

Once you have chosen the correct handle for the doors, the available finishes will be shown in the drop-down menu. Not all styles of handles are available in every finish and it is recommended to check the sizes and technical drawings for the particular product you want to make sure that you can get the correct size and fit.

It is essential that when selecting the new set of upvc lever pad handles, they are in line with the PZ (distance from the handle spindle to the center of the hole of the cylinder) of your multipoint door locks. This is because they are required to be aligned to ensure that doors stay locked, regardless of whether you are viewing them from the inside or from the outside. Our handles are designed to fit most standard cylinders, however it is a good idea to double-check before ordering.

If you are looking to upgrade to dual spindle levers, you'll need to take out the handles you have already installed and disassemble the lock case. This will require an extra split cylinder inline. You can purchase these separately. We have included a diagram of the technical aspects in the images of each product.

It is a good idea to loosen the screws that are holding your door handle, and then inspect the mechanism. You may have to loosen the screws a bit more if they are not tight. After that, you can remove the old handle and spindle and replace it with a new door handle made of upvc. It is essential to ensure that the handle is in the right position before screwing it into place. You can do this by placing your finger between the frame, and the handle, to ensure that it's in the right position.

Lever/Lever

Lever door handles function as an a multi-point lock using a Euro cylinder. They are found on the majority of double doors made of Aluminium door Handle, upvc doors and a few wooden doors. They come in two varieties, with a lever on the interior and a paddle outside. Sprung - They have an internal spring cassette within the backplate to help bring the handle lever into an upright position. Non-sprung - These do not include a spring mechanism and will need to be manually pulled to raise the handle lever back to its horizontal position.

To repair a door handle lever that is sagging it is necessary to locate the detent access pin or hole. It's usually small, protruding ring or rectangular found on the handle base plate. Once you have located the detent access hole or pin, you are able to remove it using the help of a screwdriver.

After the handle is placed horizontally, you can put back the screws. Make sure to tighten them so that the handle remains firmly attached to the base plate. Consider applying a threadlocking solution to the screw threads in order to increase grip and stop them from loosing over time.

There are a variety of reasons why door handles of levers slide. The most common cause is that the fixings have been too tightened and are putting strain on the lever bearing causing it to bind against the door's face. It could also be that the levers have not been operated at a right angle, which compresses the latch mechanism, preventing it from fully springing into motion.

The most common reason for a sprung lever not working correctly is the spring not being in the correct position on the backplate. The most effective way to determine this is to move the handle to see whether it returns to its horizontal position.

If your door handles are loose it is crucial to find the problem quickly, as this could lead to excessive wear on the screws, and even to the handle falling off the base plate. It is recommended to tighten all screws that are loose regularly to help to stop them from loosening.

Lever/Snib

These upvc door handles are also known as 'Snib' handle sets and have a snib button on the top of the lever that can be pressed down to lock your door if you don't have an fake lock. They are usually fitted with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or lock centre) door lock. We also stock a range of door handles 68PZ from manufacturers such as Ferco and Fab & Fix.

You can upgrade your home by changing your door handles regardless of whether you're replacing upvc window handles the handles on your existing ones or installing new ones on doors that you've built. There are many styles of upvc door handle available with traditional levers on backplates, straight or curved short latches and knob handles that resemble dummy knobs for multi point locks, which are ideal for French doors.

Lever on backplate handles are often rectangular in shape but you can also find circular or oval shaped models that are referred to as rose door handles. These door handles are characterized by a lever or a knob that is attached to a backplate. The backplate can be removed to allow for hidden fixing.

These handles are available in various finishes, including chrome and coloured finishes, to be matched to your door and hardware such as knobs, hinges and bolts. Some handles are equipped with a grub screw to attach the knob or lever to the spindle. Other handles come with bathroom spindles that can be used to control bathroom locks and feature a thumbturn turn as well as a release mechanism, which is ideal to use on doors for bathrooms.

Mortise

If your uPVC front door handle is stuck in the open position, the reason is most likely to be related to the tubular latch. This can be caused by a number of things, but the most common is the lack of lubrication on the latch plate. It is possible to solve this issue by opening the door, spraying lubricant on the handle and lock. Or, it could be that the latch plate is dislodged from the backplate. This is a more difficult problem that would require the assistance of a specialist.

A multipoint door handle system is an ideal solution to solve the issue of a door handle that is stuck. These handles mount through the door's faceplate and are operated with a thumb turn knob or key that triggers an electronic cam that locks the deadbolt. The handles are available in a range of sizes that will fit various kinds of uPVC doors and come in an array of attractive finishes that match the hardware you already have. The handles can be purchased online or through the local locksmith and can be installed with clear instructions.

You will need to know your PZ cylinder's size to choose the correct replacement upvc window handles handle set. This is the distance from the edge of the door frame to the centre edge of the hole in the handle in millimetres. You'll also need the type of lock on your door, whether it's a mortise lock or a hook lock. Once you know these measurements, the simplest method to determine the right handles is to filter by brand on the website. This will narrow down your choices and allow you to choose the appropriate size from the list.

A typical set of handles includes the handle unit, two screws of different lengths, drill guides and installation instructions. Smarter versions, such as the Igloohome Smart Mortise 2+ include a mortice lock with keypad. These are more sophisticated units that are best designed for professionals or highly skilled DIYers. Some handle sets have a range of other accessories, like weather strips, that can be used to enhance the appearance of the door.