Choosing the Right Window Handle For Your UPVC Window

The correct window handle is crucial for a properly installed uPVC. You'll require a design that is not only practical but also complements the style of your home.

The process of changing a uPVC window handle is simple. All you need are the following tools and only a few minutes of your time.

Metal

Metal window handles are both a decorative piece and an essential hardware item to improve the security of your home. A variety of window handles are available that can be adapted to different frames and materials. Some of these handles are made specifically for sash windows, to make closing and opening the window easier and less likely to jam. If you're seeking a safer option, there are a number of metal locking mechanisms designed to prevent the window from being opened beyond a certain amount.

Espag handles are probably the most well-known type of window handle used on UPVC windows. They have a spindle mental on the back which is attached to the frame of the window which drives the window mechanism. Both UPVC and aluminum windows come with them.

Cockspur handles are another common type of window handle typically found on older UPVC windows. They can be more difficult to operate than modern Espag handles because they use the traditional locking mechanism for pegs.

For a sleeker design there are cam handles available. They have a sleek edge and are designed to fit with many other types of uPVC windows. They are ideal for tilt and turn windows in which you can open the window from the bottom while being in a position to open the top.

When choosing new metal window handles it is important to take into consideration a variety of factors, including the step height as well as the direction in which the handle will be rotated. The distance between the underside and bottom of the screw plate is the most important aspect to take into account. The second one is the direction that the handle can be turned. Some handles are able to rotate in one direction, for example clockwise. Other handles can only rotate in the opposite direction.

Plastic

There are many kinds of window handles made of plastic. They are all designed to operate windows and protect them from intruders. They are available in a variety of colours and styles to fit uPVC and aluminium windows. Some windows are also designed to have a lock built in. This increases security that allows you to keep the window open and safe from intrusion.

A variety of situations can lead to window handle problems. Sometimes, they may not be able turn properly. This can happen due to dust penetrating the mechanism and blocking it or causing dirt. The most frequent issue is when the handle of the window begins to move tightly. This is a sign that the window handle needs attention.

It is crucial to speak with an expert in the event of this. They can assist you in resolving the issue quickly and efficiently. They can also provide advice on replacing a window handle made of plastic with an alternative that will work better and more reliably.

Most manufacturers will utilize the same fasteners, no matter what type handle you have. This means it's easy to replace your window bi-fold doors Handle and lock using a exact match.

When you're trying to find the ideal replacement handle, you need to be aware of your window's size and design. This will ensure that you purchase a handle that is perfect and won't cause any issues with your existing windows. Note the size of the spindle, which is the distance the handle extends its nose from the base. This is important if you plan to utilize a window handle with restrictions.

Casement

Similar to awning windows, casement windows hinge on the top and bottom, however they open sideways to the left or right rather than opening up vertically. They're also easier to clean and provide a fantastic view of your backyard or garden, while also permitting fresh air to enter. They're a popular choice for new construction and they can also add an architectural feature to older homes, too. However, as time passes, they can become difficult to open or close because of worn-out hardware or damaged gears. In some instances window specialists may need to replace the crank mechanism.

Casement windows or awning windows typically have a roto-gear and crank mechanism that allows the window to be closed and opened but also include an locking mechanism that keeps the sash in place while closed. The lock on an window with an awning function is linked to the bezel locks to secure the window. However, many people overtighten the handle on the casement window. This can cause the locking mechanisms to operate against each with windows to become tangled and not close or open properly.

Over time the handle on the window handles replacement can also become stripped. This can occur when the window was opened and closed repeatedly over a prolonged period of time. This could also happen when the window is being used as a prop while it is open, causing the operating handle to rub on the crank shaft and gears.

Replacing a casement window or the awning window crank is an easy DIY window repair. It can save you money over the course of time. You'll first have to find the trim mounting screw that holds the casement cover (Photo 3). After removing the screws, you can take off the handle from the previous one and inspect the crank mechanism. The gears can be lubricated again, however if they're already damaged, you might have to replace them.

Cockspur

Cockspur window handles can be found on older uPVC or timber windows. They lock with a key, are easy to operate and provide an effective barrier against cold and noise from the outside. The handle opens to the outside when you pull down the lever. The cockspur nose then closes over the wedge striker within the frame and seals the window. By replacing both the handle as well as the wedge that cockspur is, you can improve the efficiency of double glazed handles-glazed windows and security.

The replacement cockspur window handles are available in left and right hand options and operate by turning them 90 degrees. They have a small 'spur' that presses against the PVC wedge on the window frame to create a secure closure. They are simple to put in and come with a choice of finishes including black, white, satin chrome and PVD gold.

The backset measurement of a cockspur handle could be tricky, especially when you're replacing a handle. This handle has been created to address this issue and features three packers of various thicknesses that can be placed on the underside of the handle nose to create a variety of backset step heights including 9mm, 13mm, 17mm and 21mm.

The Schlosser Technik Apto is a top-quality replacement cockspur with flexible screw fixing centers. It is suitable in a variety of applications ranging from 9mm and 21mm. It also has key locking simple and easy to install, available in a range of finishes. It also includes left and right hand variations.

This handle can be used to windows that tilt and turn but not side-opening casement windows (which use a separate pivot and tilt). This handle can be used to replace damaged or outdated handles on uPVC and aluminium frames by using rivets instead of screws. The handle can be fixed to your window frame by using an edging gun.

Espagnolette

The mechanism that locks your uPVC window is the espagnolette lock or shootbolt. These are common in older homes and offer both aesthetics as well as security. Espagnolette handles can be both key-locking and non-key-locking and are available in both cranked and inline designs. They can also be a straight or curved style. The key-locking push button offers additional security by preventing the handle from being pulled open from the outside by the long, thin screw driver that is stuck between the frames - a very frequent method of burglary!

GB DIY Store offers a wide range of handles with espagnolette. Each one has a different spindle length that extends from the back of the handle, therefore when you are looking to replace your espag handles, it's important to determine the current handle's spindle size to ensure you get the correct size replacement handle. After you've determined the length of your spindle on your current handle, look through our selection of espag handles to locate the perfect style for your windows.

We have a great assortment of white upvc door locks and handles espagnolette handles with key locking and non-key locking options. They come in various colours and spindle lengths to ensure you can match your new handles to the existing window frame and décor. Our collection of espagnolette door handles includes contemporary and contemporary styles as well as classic designs, and each replacement double glazing window handles handle comes with 5 different magnetic spindle lengths between 15mm and55mm, making it easy to fit the handle to your window without needing to purchase a specific size of screw!

A clever rose on the back of the rose makes sure that the spindle fits in the correct spot and can only be inserted using the left-hand or right-hand lever, avoiding any mishaps. A spindle made of metal is used to secure the espagnolette handle. The handle is secured by an innovative mechanism called a click-fit that is activated by turning the handle with a finger and it emits an audible "click".