Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. It's discreet and doesn't require additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be altered up to 20 times. This allows your vehicle to begin.

Simple PIN code Change Process

With the increasing rate of vehicle thefts, many owners are looking to upgrade their security. There are a myriad of aftermarket security devices available from tracking systems to immobilisers and alarms. However, not all of them are equally effective in protecting your vehicle. A tracking system can aid in finding your vehicle in the event of it being stolen however, it won't stop the crime. Immobilisers, in contrast, do exactly what they state on the tin: they shut down the motor of your car so that it isn't able to be started. The Autowatch ghost immobiliser installers near me immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your vehicle.

Using the existing buttons in your car The bmw x5 ghost installer device generates a unique sequence which must be entered prior to the engine can start. This can be accomplished using the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car immobiliser ghost (fapset.com) without the button sequence. This is a great option if you want to give your car to valet parking or for maintenance. The immobiliser will stay in operation.

The Ghost is a very unique and ingenious device that works in conjunction with the buttons on your vehicle rather than as a separate unit. It's not just an effective deterrent for vehicle theft, but it can be used on future vehicles you own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof small device

The Autowatch ghost immobiliser is an advanced security device that protects your pride and joy against key cloning, hacking & ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus to disable the engine. It can be fitted into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices that are a popular method used by car thieves to circumvent immobilisers.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing techniques as well as identified by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, centre console or door panels, to create a unique disarming sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app only allows one connection, using the audi rs4 ghost installer's unique pairing code. the Ghost. All communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started only if a valid PIN has been entered. It can also be put into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) to allow you to give your car to a valet service to be serviced without needing to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device snoops on electronic signals that block the system of your vehicle from performing its normal start-up routine until you input an individual passcode. The system can be turned on and off by using your smartphone's app without the need for wires.

The factory-installed immobilisers function with a transponder which is built into the key. This transmits a signal to the ECU. The car will start when the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser won't recognise it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It shields your car from hacking, key cloning and even key theft. Only by physically towing your vehicle away could a thief get it, and they would still not be able to drive it.

Ghost makes use of the buttons on your vehicle, including the indicator stalk, steering wheel and door panels to generate an unique PIN code that is changeable that needs to be entered before you can drive. This is not required to use additional hardware like a key-fob and can be as long as 20 presses long. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is concealed within the vehicle, so it cannot be disabled or removed by thieves and is more difficult to remove than a car alarm that requires disarming via a button sequence. This makes it a perfect alternative to a GPS tracker that can assist in locating your car after it's been stolen.

Emergency PIN code override

You don't need to look too far on social media to find stories or even videos of vehicles that have been stolen by car thieves employing the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle without the original keys.

Our Ghost immobiliser is specifically designed to prevent this and provide you with an extra layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating an individual pin code push sequence from your buttons on the steering wheel, door panel and centre console. This unique PIN is entered alongside your original key fob in order to stop the engine from beginning. The unique PIN for override can be found on the black card that you will receive following your installation. It's easy to remember as there are no LED indications.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can tell what type of security systems you have installed. This makes it a fantastic alternative to the tracking device.

Contrary to most security systems that have a relay inside the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependant). This enables them to shut down the vehicle completely through an electronic block of commands to both the ECU and the engine.

They can also be linked to a separate alarm, immobiliser or tracker. This must be specified prior to the installation. They are also fully service/valet mode-compatible and a good alternative to a tracker when you are taking your car in for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen without the owners keys. With the ease of access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to take your joy and pride. To prevent this from happening, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your vehicle has been hijacked.

It connects directly to your car's ECU (Engine Control Unit) via the data loop of CAN. It is completely silent because it does not utilize radio frequencies or key fobs. This means it cannot be detected by diagnostics or any other car hacking devices. It also protects against adding an additional key or replacing the ECU to get around the system as only the correct PIN code will allow the engine to start.

The device is hidden within your car and can be accessed by existing buttons on your steering wheel, center console and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits has to be entered before you are able to start your vehicle.

This is the very first aftermarket CAN-bus immobiliser that was designed. It will stop your vehicle from being driven or even started in the event that you do not enter a PIN code before entering. If the device is in armed and you attempt to drive off it will display an indicator on your dash, which will flash continuously for about 300m. If you type in your PIN code at this point, it will disable the anti-hijack device and your car will continue to operate in the normal way. If you don't enter your PIN at this point, the indicator will continue to flash and require a new pin code every time you attempt to start your car.