UPVC Replacement Door Handles

The handles on your doors get worn out with time and require to be replaced. It is important to match the dimensions of the handles that were previously used when replacing them.

The three measurements to check are the top screw position the lever and key hole sizes. Use the size guide to assist you.

Inline Lever/Lever

A lever handle is a contemporary door handle designed to work with new or replacement doors. This type of handle is available in various styles and finishes. A variety of manufacturers provide this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles made of uPVC/Composite are constructed of durable materials and are suitable for multi point lock doors which require a robust design. The handles are inline and they use the same spindle and screws to secure them. They can be easily installed on any uPVC/Composite doors.

The spring lever design allows the handle for double glazed window to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been endurance tested to 200,000 cycles, which will ensure the quality of the finish and performance of the handle over time. The lever that springs is adjustable to fit a broad range of locks. This is useful for doors with narrower openings where the cylinder is further away from the door. A shorter lever is an ideal choice for doors where the latch can be operated by a thumb turn inside.

Lever Pad

A Lever Pad door handle made of upvc functions differently than lever handles found on most doors. The handle can use a single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are usually utilized on UPVC doors with double glazing handle glazing. They are available in a range of finishes and variations.

The handles have been tested to the minimum of 200k cycles and are available in a variety of finishes like white window handles and Silver, as well as Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high degree of durability and performance for its intended use.

All of the UPVC lever pad designs come with the spindle and screws which allow them to be installed on any new or existing uPVC door. The backplate fixing centres of 211mm permit a bigger size handle that is often a benefit when replacing a faulty or worn multi point door lock mechanism. The handle levers are spring-loaded, thereby solving the issue of door handles sagging out of their horizontal position when not in use.

It is important to match the dimensions of the PZ for both the multipoint lock as well as the uPVC doors when selecting a replacement UPVC spindle and handle. This measurement is also called the 'handle centre' or 'cylinder centres which is a crucial aspect of matching up the correct handles.

Once you have decided on the correct size of PZ, you will need to make sure that the push and lever pads are shaped to fit the American with Disabilities Act compliant handles that you need for your door. They typically have a square or round design with an internal lever as well as an external push pad.

The majority of UPVC Lever Pads we sell are sprung. This means that they return to a horizontal position after they are not in use instead of hanging and possibly sticking in the frame. This prevents draughts from entering the home. The majority of UPVC lever pad handles are available in left and right handed versions that allow them to be installed on either side of the doors.

Euro Cylinder

Cylinder locks are usually used on uPVC doors, but they can also be used on other types of door. They operate with a key to unlock a cylinder that will reveal pins that can be aligned to those inside the lock body, allow them to rotate a revolving cam, thus opening the door. Euro cylinders are available with up to six pins. Doors that are internal and external require different levels of security.

The choice of the correct cylinder is essential; it is dependent on the way your doors and handles are utilized. For example, external doors must be secured with an extra secure cylinder, while internal doors can be secured using a standard cylinder. In addition, some cylinders have extra features which can enhance security even more, like anti-drill or anti-bump features.

A euro cylinder should be properly measured to ensure it is the right size for your door. The cylinder should be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn, in the event that one is present. It is best to do this while the lock is in place however when this isn't possible, you can remove it to measure. A cylinder that is protruding beyond the handle and escutcheon could be vulnerable to attacks, such as snapping locks, therefore it is crucial to make sure it's not too long.

Most modern cylinders are made with anti-drill and bump resistance features that are built into their design. These features are designed to minimize the chances of an attack by forcing the cylinder to rotate in an opposite direction. This will help to deflect attacks and keep your door safe.

Some cylinders are designed to withstand snapping. This is a common attack on cylinders. A special tool is used to break the lock's break line and the front of the cylinder is snapped off. This is a faster and easier way to gain access than the use of a multipoint locking system. It also leaves less evidence of the break-in which can make it difficult to prove insurance claims.

Spring Cassette

This spring cassette sits inside the base of your door handle's backplate, providing a spring solution to return the multipoint lock handles back to their normal position after usage. There was a time when handles did not have a spring built into them, and without it they can droop or drop once the locking mechanism is removed. This component is the best way to solve this issue. It also prevents your upvc door from becoming stuck in either the open or closed position, as they are difficult to close manually.

These spring cassettes have been specifically made for use with multipoint locks that are sprung, they will not fit non-sprung multipoint handles. You will need to have a custom hole cut into your backplate in order for them to fit (please look at the image for a technical diagram). They are a replacement for existing broken or missing cassettes in the door handle backplate of various brands of uPVC doors. They are sold as one unit. They come with a square cut out that accommodates an 8mm shaft.

These spring cassettes are a great value for money way to fix the problem of door handles that are sliding. They are simple to install and will extend the lifespan of your upvc door Locks And handles doors. For more information about our range of uPVC accessories and spares, please feel free to get in contact with our team. We are always available to offer professional advice and assistance you.