Replacement UPVC Door Handles

You can find the ideal handle for your door, whether replacing your existing handles or adding additional security. These upvc handle are easy to install and meet the minimum 92mm center distance of multipoint locks.

The most important measurements to consider are the backplate fixing centers and lever/key hole dimensions. Check these measurements against your current marks before placing an order.

Lever/Pad

Lever pad handles consist of a lever on one side and a handle that is shaped like a paddle on the opposite. They are intended for use with key wind locks. However, they can be fitted to multipoint split spindle door locks.

Our selection of upvc handle lever pads are available in a range of finishes. They will be displayed in the drop-down list after you have selected the correct handle for your door. Certain styles of handles are not available in all finishes. It is recommended to examine the technical drawing and dimensions sections for the particular item you are looking to ensure that you get the correct size and fit.

When you are choosing new upvc lever pad door handles it is crucial to make sure that they match the PZ (distance between the spindle of the handle and the center of the cylinder hole) of your existing multipoint locks, as these need to be in the same line to allow doors to remain locked, either from the inside or the outside. Our handles are designed to fit a wide range of standard cylinders, but it is a good idea to double glazed front door handles-check before purchasing.

You'll need to take off your handles that you have already installed and then dismantle the lock case if you are upgrading to dual spindle handle levers since this will require an additional split cylinder inline. You can purchase these separately. We have included a technical diagram in the images of each product.

Once you have removed the screws that hold the door handle you have, it is an ideal idea to loosen them, and then inspect the mechanism to determine the condition it is in. If the screws are too tight it is possible to loosen them more. Then, you can remove the spindle from the door handle and replace it with your new Upvc handle. Before you screw the handle into position, it is recommended to ensure that it is in the proper place. You can do this by inserting your finger into the gap between the frame of the door and the handle to make sure it is in a level position.

Lever/Lever

Lever door handles operate with a multi-point lock that utilizes the Euro Cylinder and can be found on a majority of upvc double glazed door handle doors, aluminium doors, and some wooden doors. They are equipped with an inside lever and an outside paddle and are generally available in two different types. Sprung - They have a spring cassette inside the backplate, which helps bring the handle lever to the horizontal position. Non-sprung: These do not have a mechanism for bringing the handle lever to a horizontal angle.

To fix a sagging lever door handle, you will need to locate the detent access hole or pin, which is usually a small round or rectangle shaped hole or protruding pin located on one side of the base plate. Once you have located the detent access hole or pin, you are able to remove it with a screwdriver.

When the handle is in a horizontal position you can re-install the screws and tighten them until the handle is secure on the base plate. Consider applying a threadlocking solution to the screw threads in order to improve grip and prevent them from loosening over time.

There are many reasons why door handles of levers droop. The most common cause is that the fixings have been over tightened and are putting strain on the lever bearing and causing it to pull against the door face. It is also possible that the levers have not been operated at a right angle, which causes compression of the latch mechanism and prevents it from fully springing into action.

Another common cause is that the sprung lever is not working properly. This is typically due to the spring not being in the right position within the backplate. To check whether the handle has returned to horizontal, simply move it.

If the door handles aren't tight, it is essential to spot the issue fast, as this could lead to excessive wear on the screws and eventually to the handle falling off of the base plate. It is recommended to tighten all screws that are loose on a regular basis to help to prevent them from becoming loose.

Lever/Snib

These upvc door handles are also known as 'Snib' handle sets and have a snib button towards the top of the lever that you can press down to lock your door in the event that you don't have a dummy lock. These handles come with a Fullex lock 68PZ. (68mm between spindle and the lock centre). We also stock a range of door handles 68PZ from brands like Ferco and Fab & Fix.

You can make your home more modern by changing the door handles regardless of whether you're replacing your existing handles or installing new ones on doors that you have constructed. There are many styles to choose from for upvc door handles, including the traditional lever on backplate. Other options include curved or straight short latches, and dummy knobs for multi-point locks. These are perfect for French doors.

Lever on backplate handles are typically rectangular in shape, however there are also circular or oval shaped versions that are referred to as rose door handles. These handles are identified by a lever or a knob that is mounted on a backplate. The backplate can be removed for concealed fixing.

The handles are available in a variety of finishes including coloured and chrome finishes, to complement your door and other hardware like knobs, bolts and hinges. Some handles come with grub screws to help firmly attach the lever or knob to the spindle. Some handles are equipped with bathroom spindles which are suitable for bathroom locks. They also have a thumbturn release mechanism, and can be used on bathroom doors.

Mortise

If your uPVC front door handle is stuck in the open position, the reason is most likely to be related to the tubular latch. There may be a few factors that could cause this, the most common being a simple lack of lubrication on the latch plate. It is possible to solve this problem by opening the door, spraying lubricant on the lock and handle. It could also be that the latch plate has been detached from the backplate. This could be more complicated and would require a professional to fix it.

A multipoint handle is the best solution for a stuck door handle. These handles are mounted on the faceplate of the door and are operated with the thumb turn knob or key that activates an electronic cam that locks the deadbolt. The window locking handles are available in a variety of sizes that will fit different types of upvc door locks and handles doors. They also come with a variety of attractive finishes to complement the existing hardware. These handles are available online or from the local locksmith. They are simple to install and come with clear instructions.

If you want to replace the handle set, you will be required to be aware of the PZ size of the cylinder. This is the distance from the edge of the inner frame of the door to the center point of the hole for the handle in millimetres. You'll also require the type of lock on your door, irrespective of whether it is a mortise or hook lock. Once you know these measurements, the most efficient method to determine the right handles is to filter by brand option on the website. This will narrow down the options and you can then choose the appropriate size from the list.

A typical window handle repairs set includes the handle unit, a pair of different length screws, drill guides and installation instructions. Smart versions, like the Igloohome Smart Mortise 2+ include a mortice lock with a keypad. These are more complex models and are ideal for professional installers or very adept DIYers. Some handle sets come with a variety of accessories, such as weather strips, which can be used to improve the appearance of the door.