Ghost Immobiliser Installation

Add a ghost immobiliser your car and protect it from car thieves. Our TASSA certified system guards vehicles against hacking, key cloning, and immobiliser bypassing.

The system is hidden in your vehicle's wiring loom and is inaccessible to anyone who is looking. It is created by generating the pin code push sequence by using buttons already on the steering wheel, door cards and center console.

No circuit cuts

A car is a valuable item that takes many years of effort to acquire, so it's understandable why owners want to safeguard their vehicle against theft. However, traditional security devices such as wheel locks and alarms can easily be cut off or bypassed by thieves. A ghost immobiliser on the other hand is a very effective solution that works silently and cannot be detected by modern thieves.

Ghost immobilisers or a hidden device is a device that communicates to the data network of your vehicle's CAN to shut off the engine. It does this without radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the dash, steering wheel and door panels. This generates a unique pincode that is only known by you. The code can be changed at any time, and can include up to 20 numbers based on your preference. It comes with an emergency code you can use in the event of forgetting your PIN.

The ghost immobiliser could also be used to prevent relay boxes from transmitting the signal of your car's key from within your home, which will open the doors and begin the vehicle. It could even block advanced methods of stealing your car such as OBD port hacking. The device is tiny and weatherproof, meaning it's difficult to detect and is even more difficult to interfere with.

The ghost immobiliser also has an advantage: it is able to be fitted to your vehicle without leaving any permanent marks. It is ideal for people who are planning to sell their car in the near future. It's also a lot more efficient and less time-consuming to install than a factory-fitted system.

The Autowatch Ghost Installers Near Me Ghost, a cutting-edge new generation device, stops thefts from cars that are not connected to a vehicle's CAN network and using the existing buttons to generate a unique PIN code. This is a snoopy device that can be put in without wires being cut and does not require additional key fobs. It is also connected to the vehicle's original ECU and prevents thieves from bypassing it by using a new key or replacing the ECU with a "relay". This system is TASSA verified and can be linked to an International Security Register, allowing owners peace of mind knowing that their vehicles are secure from theft.

No scanning by RF

You will want to protect your vehicle from theft if have spent an enormous amount of money and effort to customize it. One way to do this is to install an immobiliser, which will stop the engine from starting until you enter a unique PIN. You can create a 20-digit pin using the buttons on your dashboard and the steering wheel. This will ensure that only you have the right to drive your vehicle. You can also set up a valet or service mode that allows you temporarily to start your car without entering the PIN code. This will permit your technician to work on your vehicle without your presence. This feature is ideal for people who want to cut down on time and make their lives easier.

ghost immobiliser 2 immobilisers are next generation device that connects to your vehicle's CAN data network and uses the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to blend into with the rest of your vehicle, since it doesn't emit any noise or LED indicator. It can be installed anywhere on your vehicle without affecting the aesthetics.

This stealthy gadget has been approved by TASSA and could lower the cost of insurance. It also has a tracking function, which can locate your vehicle even if it has been stolen. This is great when you own a unique expensive car that you've put a lot of effort customizing.

The Autowatch Ghost can be used in conjunction with an iPhone app to enable you to start your car remotely in the event you forgot your PIN or not able to enter the vehicle for some reason. This feature is ideal if you have to go on errands or pick up your kids but don't want to risk having someone else drive your car. It is also helpful if you need to take your vehicle to a mechanic for maintenance or repair.

The Ghost has the advantage that it doesn't transmit or detect radio frequencies which means it's not detected by thieves who employ RF scanning and code grabbing techniques. It can also safeguard your car from key cloning and ECU swapping which are the most typical methods of theft from cars.

No key to cloning

Ghost immobilisers are a great way to protect top-end vehicles and stop key cloning. They stop your vehicle from starting unless a PIN code is entered in conjunction with the standard key fob. This makes it difficult for thieves to take your vehicle and could deter them from doing it in the first place. This is a good idea in the event that your vehicle has been extensively customized or if it is a rare model.

These immobilisers connect to the vehicle's onboard CAN data network and are completely hidden which means there is no indication of its presence inside the vehicle. It is also impossible for a burglar to locate the device using radio frequency scanning or code technology for grabbing. This means that a thief will need to wait longer to steal your vehicle.

To get around the system, a thief must be aware of the pin code and the location of the ghost installer. The pin code is unique to you and can change it as often as you need to. The pin code you select is easy to remember, but mathematically difficult for anyone else to figure out. In addition the engineer will provide you with a backup PIN code that can be used to bypass the pin in case you ever forget the pin.

The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and is completely customizable to match the appearance of your car. It is also cost-effective and simple to use. You can even transfer the device to a different vehicle if you switch vehicles during the course of ownership, provided that the new vehicle is compatible with it.

The CAN bus is compatible with other security features. For instance, it could detect damage to your vehicle and alert the owner. It can also shut off the engine if it senses that the car is being manipulated. The system can protect your vehicle from hacking and key duplicate. It also detects vibrations and contact with the vehicle. In addition, it can warn the owner if the vehicle has been moved.

No OBD port hacking

ghost ii immobiliser is a hidden immobiliser module connected to your vehicle's CAN data network which prevents a thief from gaining access to your vehicle to disable the alarm, turn off the key fob and code new keys. This technology is a significant improvement over the traditional methods employed by thieves in the past to steal your car. The CAN data network also ensures that the system won't be affected by disconnecting or changing your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against key-cloning, hacking and replica car theft. It works without LED indications or key fobs, instead leveraging the buttons on your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN sequence (up to 20 button presses) which must be entered prior to when you can drive your vehicle away.

Modern thieves use diagnostics to detect circuit breaks on your vehicle. They can bypass immobilisers that require a lot wiring or are integrated into the wiring. The Ghost is weatherproof, doesn't need any additional wiring, and can't be identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft devices.

Another advantage of a Ghost immobiliser is that your vehicle is only able to be started by a person who knows the PIN code and has physical access to your vehicle. This is a major advantage over traditional security systems which can be tampered with by simple cable tampering or a screwdriver.

If you forget your PIN you can reset it easily with the emergency PIN override function on a mobile device or computer. This is helpful if you need to start your car after having left it in a garage or with the valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorized installers. It features an RFID fingerprint system that can identify individual parts that allows for the return of stolen items if they are discovered. It can also be turned into a service mode,' which allows the engine to be started when your vehicle is in a garage or with valet parking, but you will need to enter your PIN again to exit the car.