How to Replace a UPVC Window Handle

If your window handle made of upvc is broken, don't panic. Replacing a window handle made of upvc is a relatively simple task and can be accomplished in just a few steps.

No matter if you have a cranked or in-line espagnolette window handle, they all feature a square spindle that extends from the back plate and is slotted into the locking mechanism.

Determine the type and size of the lock and handle

Over time window handles or locks may get damaged and lose functionality. It is possible to repair this issue without having to replace the entire uPVC unit. The first thing to do is to identify the size and type of your handle and lock. This will help you identify the replacement parts that you need.

You can identify the type of handle by looking at the base. There is the screw or pin that is holding the handle to its base. If the screw is missing, it could indicate that the handle has split from the base. If the handle has broken internally and is no longer gripping the spindle, this could also indicate that it needs glass replacement in windows.

There are a variety of uPVC handles that are available, but the Espag handle is the most common. They are usually fixed with two bolts, and the spindle engages the locking mechanism of the window frame. These handles are typically used on tilt and turn uPVC windows.

Cockspur handles are a different kind of uPVC handle. They are similar to Espag handles, but they have smaller projections from the frame. These handles are generally used on older uPVC window frames.

Venetian window handles are another alternative. They are similar to Espag handles, but have a flat bottom which allows them to be installed in a flush position with the frame. These are a great choice for homeowners who are looking for an elegant and stylish handle that blends with their uPVC window frames. They are available in a range of colors that can match any style.

Take a measurement of the spindle

It's important to be aware of how the handle fixed in place before ordering a replacement. This will determine how tight or loose it is and if it will fit correctly into the window frame. This can be determined by identifying the handle's type and determining the spindle's measurement. The spindle is the metal shaft that connects the handle to the lock in the window frame. It's available in various sizes with the current industry standard being 8mm. Older handles might have a 9mm cross-section, so it's crucial to determine the cross-section of the old one to make sure you get the proper size replacement.

There are many kinds of window handles, but the most popular are inline Espagnolette and the cockspur handle. They operate an locking mechanism within the window with shootbolt rods which secure the window when it's closed. Depending on the type of handle, they are held in place with screws or pins.

You can find replacement handles for windows made of upvc online and in most DIY stores. They are available in a variety of finishes and are suitable for both new or replacement windows. They can also be key-locking or non-locking for extra security.

To remove the handle, open the door and loosen the screws that hold it in place. Keep the screws in a container to avoid damage. Once the screws are removed, carefully remove the handle. Find the distance from the base of the spindle to its tip. This will give you the information needed to buy the correct replacement. The spindle of the handle is the metal shaft that connects it to the gearbox that locks the window frame.

Remove the handle that was previously used

Switching the handle of a uPVC window pane replacement handle is an easy task and usually takes less than five minutes with the appropriate tools. The first step is to identify the kind of lock and handle that will allow you to determine the best replacement. Then, you can measure the spindle to make sure that the handle is suitable. The old handle needs to be removed and replaced with the new one.

The majority of uPVC handles are inline Espagnolette handles, with central spindles that slot into the locking mechanism cost of windows replacement the window. They are typically simple to remove, but they could require force if they get stuck. The handle is usually fixed by two screws that you can remove by using the help of a screwdriver. Depending on the type of handle, you may also need to remove any pins holding it in place.

After removing the screws you can remove the old handle. When the handle is opened and the top of the baseplate should be visible. This will reveal two screws that can be removed. There's also small silver or another colour sticker that has to be removed if it's still in place.

You can now put in the new handle using the screws from the previous handle. Make sure that the handle is in the unlocked or open position, then align the screw holes with the ones on the window. After you've done this you can put on the caps on the screws and test the new handle to confirm that it works properly. It's easy to change a uPVC handle, but you need to make it right.

Fit the new handle

It's time to put in your new handle if it has been successfully removed the old one from the frame. Begin by locating and taking off the screws with your screwdriver. After they've been removed, put them in a safe location and proceed to the next step.

Then, you can insert the new spindle into the handle by lining it up with the hole in the handle and screwing it in. Be sure to align the holes of the handle with holes in the window frame. You should use a screw that is identical to the one used before, or it could cause the handle to not being secure.

uPVC Espag handles are equipped with a 7mm square spindle that turns the lock mechanism fitted to the window. This type of handle can be found in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) feature long noses that lock over the frame's outer or transom bar cross members and are often found in older windows made of uPVC.

It is essential to lock and unlock the window a few times after the handle has been put in place. If everything goes according the plan, the replacement uPVC handle should be securely attached and working smoothly. If you encounter any issues this guideline will help you identify the issue and fix it quickly. If you are struggling with your uPVC handle or are experiencing other issues with your home improvement using glazed, don't hesitate to contact us at Bridgewater Glass replacement for Windows for professional assistance. Our glaziers are certified to repair or replace a variety of window frames and handles making us a good choice for your double glazing needs.

Test the new handle

As time passes and through regular use the uPVC locks and handles may be damaged and wear and wear and tear. This can leave them less secure and effective which is why it's crucial to replace them as soon as possible. It's also a good idea to do when you are upgrading your windows. Change the handle and locking mechanism will help to maintain your new windows' integrity.

There are a variety of uPVC sash window replacement handles. Some are fixed with screws or pins, while others feature blades that fit into the lock mechanism. Each type has its own method of replacement, therefore it's important to know what type you have before you start working on it.

Espag window handles are the most popular kind, and are typically found on newer uPVC windows. The spindle extends from the handle into the lock gearbox and activates the locking mechanism when you open the window. They are also simple to remove. However, you should be cautious not to damage the mechanism or the handle.

Cockspur handles are another alternative for uPVC window handles. They're held with a spur that hooks onto a wedge-shaped striker plate on the frame, and when you close or tilt the window, it activates the locking mechanism. This kind of handle can be more difficult to repair than other handles, but it's still a good option for homes with a lot of windows.

Venetian window handles are held by two bolts and have a low projection from the frame, in contrast to the Espag handle. These handles are great for those who want to have a flush-fitting handle that blends in with uPVC window frames. These are perfect for residential and commercial properties.