UPVC Window Repairs

uPVC windows are energy efficient and help to reduce heating bills. However, as they age problems may arise that require repair. This could include damaged hinges, handles, or locks.

Wooden window repair is relatively straightforward for DIY enthusiasts to tackle themselves. It's cheaper than purchasing a new window.

Cracks

Cracks and tears in windows made of uPVC can be a serious issue. If windows are not properly repaired, they can result in water intrusion, less effective barriers to cold weather, and can cause structural damage. It is important to find an experienced local builder or repair service that specializes in the repair of uPVC frames and can demonstrate the experience, skills and equipment required to achieve the best results. This will ensure that the crack is repaired swiftly before it gets worse and you won't have to replace your window unit or glass.

Small cracks in glass can be repaired by using a variety of home-based solutions. Masking tape and super glue are among the most popular products that will hold cracked glass in place for a time. For deeper cracks the tape might need to extend beyond the crack on both sides to get the best results.

Another option is two-part epoxy that can be used to repair broken or cracked glass. The majority of hardware stores offer this product at around $10. Ensure that your workspace is prepared prior to mixing the epoxy. Make sure you have the proper tool for the job, such as a soldering iron.

If you find that your upper or lower sash has difficulty raising it could be because the cords that connect to the sashweights are damaged. Thankfully, this is an easy fix that can be done with the help of an extension ladder and a flat-head screwdriver. A damaged dripcap can be repaired at home. Most home centers carry drip caps that are not rot free and can be easily nailed or caulked to be fixed. Also, if you have a double glazed window repairs or triple-pane window, be sure to make sure that one of the panes are not broken. This is due to the gases that fill the space between the panes contribute to improving energy efficiency and should be retained, not escaping.

Water Leaks

If your uPVC window is leaking, it can cause damage to your home and lead to costly repairs. Water leaks can also damage the structure of your house and lead to the growth of mold. To minimize the damage, it's essential to fix any problems caused by windows that leak immediately.

One common cause of window leaks is damaged sealant around the frame. Utilizing silicone caulk can help bring the condition of the seal back to its normal condition and prevent water leakage. Check for cracks and gaps around the window frame, and also the brick or stone wall surrounding your windows.

Another reason for leaky windows is the drainage hole is blocked or faulty flashing. It's important to check that the drainage holes are free and unclogged, especially during heavy rainstorms. It's also a good idea to inspect the flashing that runs around the top of your window and ensure it's sealed correctly.

It's also essential to make sure that your drip cap doesn't have any rot or is missing. A rotted or damaged drip cap could let water in the window from above, causing damage to your home's structure. Replacing the drip cap isn't difficult, and it's usually a straightforward process of purchasing the new one and putting it in place.

It's an excellent idea to have your windows tested for water-tightness by a professional. They can employ a specific tool to determine the water-tightness and strength of your windows and make sure that they meet industry standards. If your windows fail the test, they'll need to be replaced. It's a costly repair, but worthwhile to ensure the safety and security of your family.

Sagging

If your windows do not close properly, it can lead to a number issues including drafts, condensation and an increase in your energy bills. It could be an indication that the windows weren't properly installed or the sealant is no longer working. There are a few options you can do to fix the problem.

To repair your window correctly it is essential to set up a work space with plenty of natural light. Begin by laying out newspaper or a blanket to shield your flooring from any splinters or drips that might fall off the windows while you work.

You will also want to make use of a white cloth that has been immersed in a solution of detergent and water. This will ensure that you don't leave any stains of color on your windows. If you're ready to begin working on your uPVC windows, start by making a note of where the hinge channel should be located. Unscrew the channel and fill the screw holes in the frame using epoxy (for uPVC frames) or wood filler. Be sure to scrape the filled hole smooth before it sets.

Once the holes are filled you can reinstall the hinge channel. Be sure to place it on the window jamb and then drill the new screw holes about a quarter inch away from the original locations.

Then, take a measurement of the spindle that protrudes from the underside of your handle. You can order an alternative or bring it to a hardware shop for a replacement. Then, remove the setscrew from the shaft. File it flat to allow the set screw to lock onto the shaft. Then, your upvc window repair near me windows should close without a hitch.

Broken Hinges

It will be difficult to open or closing your uPVC windows in the event that the hinges are damaged or aren't working correctly. This can cause problems with security and prevent your home from being warm or cool. It's simple to find an entirely new hinge for your uPVC windows. It's essential to make sure you have the right hinge for your windows.

The hinges have to be the same size to fit into the window frame. The most commonly used hinge used in Upvc windows is an 18mm or 15mm UPVC window hinge. There are also specialized types of window hinges for different types of frames, like wooden frames. Getting the correct type of window hinge for your windows can assist you in avoiding the common issues that homeowners have with their windows, like not closing properly.

There are many reasons why your window hinges may have become slack or stiff. The most common reason is that the hinges are not sufficiently tightened. To check this, use an electric screwdriver to find the friction screw on the hinge's end. Then loosen it. Then, you can adjust it by turning it either way.

If your UPVC window hinges are not functioning as they should, contact Preston Glass Fix for a quick repair. Our technicians will examine the condition of your hinges, and give you advice on the best solution. We can replace your window hinges, re-tension them, or install new locking mechanisms to ensure that your UPVC windows are safe and secure for years to come.

Faulty Locks

UPVC window mechanisms and locks are an essential part of home security. They make it extremely difficult to open windows without breaking into the house. When a lock fails, it can be a frustrating experience, but it is a quick and easy repair and you don't need to replace the entire window.

It is often an issue that is minor and could have been easily avoided by regular maintenance. We suggest that you have your uPVC window serviced regularly as part of our annual maintenance plan to decrease the chances of having any issues.

Modern uPVC windows come with espagnolette locks which operate by pushing the nose of the handle across a wedge block then turning the handle to close the lock. They are very efficient in keeping the window closed, however with time, they may begin to fail if they are not properly maintained. We recommend using WD-40 for lubrication a couple of times per year.

If you notice your uPVC double glazed window repairs near me isn't opening and closing as easily as it did in the past, or if the lock doesn't work properly, there may be a problem with the locking gearboxes inside the frame. The process of removing this gearbox can be difficult as it requires the removing of the seals around the frame and removing the handle (be careful not to damage these).

A locksmith who specializes in UPVC repairs has the knowledge to identify the problem quickly and will then be able replace the failed locking gearbox with a exact replacement. This is a fast and simple repair that can save you hundreds of pounds by cutting out the need to purchase new windows.