Window Repairs

Window repairs can save homeowners money and help keep their homes warm. In the event of severe damages, like broken glass or a shattered frame, a replacement window may be necessary.

But there are many other issues that can be addressed to extend the lifespan of your windows. Some common problems include:

Cracked or broken panes

Whether it's an errant rock that was tossed by your lawnmowers or a tree branch blown by high winds, damaged windows are not just unattractive but can lead to higher electricity bills as the broken pieces allow cold air to enter your home. It's fairly easy to fix windows with broken panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may have to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the frame's wood with a soft cloth or paper towel.

After the area is cleaned then apply a waterproof silicone caulking around the frame's perimeter. This will stop water from getting into the frame through the crack and result in further damage.

If you have double glazed window repairs near me-pane glass, cracks that are severe could damage the gas layer between the panes, making your windows less insulative. If the crack is significant enough to threaten the quality of the glass or in the case of an inner pane that's completely missing, it's time to contact an expert.

Cracks caused by thermal stress can occur when there's an extreme temperature difference both inside and outside your home. The glass is then able to expand and contract. If this happens across two parts of a window it's best to simply replace the pane rather than trying to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready to be replaced. It can also keep out cold and bugs. You can cut a nylon stocking large enough to cover the entire crack and then glue it to the surface with duct tape. This is not an end-to-end solution, but it's a good way to keep insects out and cold air away from your home. If your windows are old and you're beginning to notice cracks in the glass, it's recommended to consult with your local window company to determine if replacing the entire upvc window repair near me could be a better option for you.

Rotten Wood

Wood rot is one of the most common problems with windows. It can alter the appearance of a house and it can also pose a safety risk. It is possible to repair rotted wood. First, you must determine the root of the wood rot. This can be done by looking for leaks in the roof and gutters that aren't functioning or cracked caulking, as well as other areas that allow water to get into the wood.

Next, you will need to take out any rotten parts of the window frame. This can be done with an axe, a claw hammer, or rasp. After removing the rotten wood, you'll need replace it with fresh wood. Pre-treated wood is recommended for this project, as it is resistant to rot. If you are not able to replace the rotted timber you can apply wood hardener and filler to repair the damaged area. This kind of product can be available at a majority of hardware stores. To achieve the best results, make sure you follow the instructions on the label.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. Apply a water-resistant sealant to the wood. Sikkens for instance, is a great product to use.

Use a two-part epoxy to safeguard the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is crucial to follow the directions on the label. Once the epoxy filler has dried it is possible to sand the wood's surface. It is best to start with a rough piece of sandpaper and then move to a smoother one.

You do not want to expose the damaged part to further moisture. So, it's an ideal idea to cover the repaired area with an oil-based primer that will shield it from moisture. After that, you are able to apply the wood sealant that is waterproof.

The W won't let you open

A window that won't open can be the result of many reasons. The house might have shifted or the wooden frames might have warped due to humid weather. There is also the possibility that someone nailed them shut for security. With a little patience and the right tools you can unlock most stuck windows.

One of the most common causes of windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks, and locks. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease will help prevent oxidation and keep your window operating properly.

Stuck windows could be the result of an unintentional break or loosening of the pulleys used to raise and lower the window. These components can lose their tension and get blocked especially if the window repair is located at least two stories above the ground.

If you are having difficulty opening a door, try using a pry-bar to gently open the upvc window repairs near me. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. You can also try running a hair dryer along the edges of the frame for a few minutes to warm the wood and help it to move more easily.

A broken spring could be the cause of a window that won't lift or lower. Based on the manufacturer of your windows, you will be required to refer to the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving components on your windows, but they aren't opening, it's time to replace windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows slip from functional to unusable since a upvc window repair near me that isn't properly shut could leave your home vulnerable to water damage and burglary. Contact our team today for more information about our replacement windows and our services!