Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped functioning, it could be due to a dead coin-cell battery, damaged receiver modules, water issues, or a malfunctioning chip. These are all easy solutions that will get your car back up to speed in no time!

Car keys can also get damaged because the blade of the key gets worn. This is an easy fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them fit an entirely new key blade for you.

Battery

The key fob inside your Peugeot 308 may die or become weak enough to not send a powerful signal. The key fob can cease to function and stop you from locking or unlocking your doors or even starting the engine. To fix this issue, you'll have to replace the battery on your key fob.

You can purchase a new battery at an auto parts shop, or at your local hardware store. Make sure that the battery is brand new and has not sat on the shelf for too long. A brand new battery is more capacity and can send a stronger signal your car.

After replacing the battery, try unlocking the doors and locking them with the key fob. If the doors do not unlock it is most likely to be with the receiver module of your car that can be reset by your local Peugeot dealer.

The internal chip of the key fob might be damaged. This could happen if you drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture could wear down over time, particularly if your replacement key for peugeot 107 fob is exposed to water for prolonged periods of time like submerging it in the ocean at the beach. To prevent this from happening it is recommended to keep your key fob free of moisture and away from water.

Water Damage

If your key fob is wet in water, whether you dropped it in the pool or fumbled it into a puddle don't think it's a case of lost cause. The key fob is protected by rubber seals, however, prolonged exposure to water could damage its electronic chip. Because water is an excellent conductor and conductor, any water that gets inside the key fob can cause a chain of short circuits which will eventually destroy the chip. After taking the batteries out, clean the contact surfaces with isopropyl and then dry them completely before putting them back in.

A dead battery may be the reason that your peugeot 3008 key fob 308 won't start. Jumper cables are a fantastic way to restart the engine if you have an additional car. If the battery is causing the problem then it must be replaced.

Another possible cause is an ineffective receiver in the vehicle, which can block the signal from the key fob. The key fob could be damaged or there could be a problem with the antenna, wiring, or the key fob itself. If you are using a new key fob it might need to be programmed for the vehicle. If you are unable solve the issue yourself call a professional technician. A trained technician will be able to diagnose the problem quickly and correct it swiftly.

Radio Interference

Interference may cause symptoms such as a key fob that's not being recognized or has a restricted range. It is either radiated or conducted, with the former being caused by power supply cables or the speaker wiring being too close to electrical components. In general, rerouting cables and moving them away from these components can solve the problem.

It's unlikely someone is listening to your key fob's signals in the intention of stealing your car however it is possible that radio interference has drowned out the signal. Fortunately, this is not a problem to fix.

If you're having issues with your keys that are not recognized, try using a fresh battery. Make sure the battery is the right size and type. Batteries that are not of the correct size can damage your fob.

These devices can interfere with the key signal, if they utilize the same radio frequency. Beware of attaching these devices to your key fob.

Pairing Issues

The remote keyless entry system has a receiver that receives radio frequency signals from the key fob. It will not be possible to start your car if this receiver isn't working even if your key fob works and can be reprogrammed. The issue can be caused by a variety of ways, such as a dead coin-cell battery or water damage. The receiver may also be malfunctioning due to a software issue or internal damage to the key.

The coin battery in your peugeot 207 remote key programming 308 keyfob is likely to have gone out of service. It is easy to replace it with a new battery, however, it's important to choose the right battery for your key fob. Using an incorrect battery could cause more problems with the key fob, therefore it's best to use the original or the Replacement Car Key Peugeot 207 that is identical in size, voltage, and specifications.

Another reason the reason your peugeot 207 key fob replacement 308 key fob might not be working is because it is paired with another vehicle. You might have accidentally given the key fob to a friend or the key was used to unlock other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. The scanner will usually ask you for specific information about the vehicle, such as the VIN or engine type, and it's essential to enter it correctly.