how to install ghost immobiliser (you can find out more)

The Ghost immobiliser, a groundbreaking product, shields your vehicle from key cloning and ECU swapping. It is connected to the vehicle's CAN data network and is concealed within the existing buttons on your dashboard or steering wheel. It does not require any radio or LED signals.

It's also unnoticeable by thieves employing modern methods, including RF scanning and code stealing technology. It's a small price to pay for protecting your pride and joy.

Easy to install

While standard vehicle immobilisers prevent thieves from starting your car if you don't have the correct key or key fob, a ghost immobiliser is an electronic device that takes it a step further. It comes with systems that stop key signal jamming, cloning and device spoofing - methods that are frequently used to steal cars equipped with standard immobilisers. It also lets you set an encryption code that is hard to break.

The system is connected to your vehicle's onboard CAN (Controller Area Network) data network and programmed to protect it by a unique PIN code that you can choose. The CAN Immobiliser will then block the engine, even if the keys are in the ignition, and it will not start again until the correct code is entered. The system is completely undetectable. There are no indicators in the form of LEDs or sounds to notify you of its presence. It does not transmit any radio frequencies, which makes it impossible to use code grabbing or RF scanning methods.

The Ghost CAN Immobiliser is deactivated through the companion app on your smartphone, which makes it easy to transfer it to a new car if you decide to trade or sell yours. It's also TASSA approved and can reduce the cost of insurance. This is a major consideration when deciding on a security system for your vehicle.

Ghost immobilisers aren't visible and is incorporated into the vehicle bodywork. This makes it difficult to remove. Ghost immobilisers are also extremely difficult to hack or disable than traditional security devices that are tamper-proof, such as beacons and alarms.

The Ghost immobiliser is used with a wide range of vehicles and includes numerous features. This includes an emergency entry system that lets you enter a passcode through the app on your smartphone which will disable the immobiliser and permit you to drive your vehicle back to home. There's also a valet mode that lets you give your vehicle to mechanics or valet services without disarming it. It can also be connected with an GPS tracker to help you locate your vehicle after it has stolen.

Easy to deactivate

In an age where car theft is rife it's essential to look for ways to protect your car's pride and joy. A ghost immobiliser is one of the most effective solutions on the market, stopping thieves from getting their hands on your car. The system works by connecting to the CAN network of your vehicle and programming a unique PIN sequence which must be entered to allow the engine to begin. This is done by using buttons on the steering wheel, centre console, or doors. A customized sequence of up 20 inputs is utilized that is very difficult to get.

The ghost immobiliser is different from traditional security systems, which use LED indicators or key fobs. It uses the CAN (Controller Area Network) system that is in your Mercedes in order to connect to the ECU via the data bus, making it inoperable. It does not have any parts removed or wires cut. This means that the device will not be detected by modern diagnostics, and it is not able to interfere with any radio frequencies that a criminal might attempt to use to locate your vehicle.

Ghost immobilisers also stop key cloning, as well as ECU swapping. This is a method commonly that thieves use to steal vehicles, however the ghost immobiliser will stop the thieves from doing this by having the correct PIN code in order to allow the engine to start. A thief will also be unable to add new keys or replace the ECU as the ghost immobiliser is specifically designed to work with existing Mercedes keys.

This technology can be used in conjunction with other security measures, for instance, GPS trackers. This will help you find your vehicle in the event of a vehicle theft, but it does not stop thieves from taking your vehicle in the first place. Ghost immobilisers, on the other hand is a great solution for owners with expensive cars.

ghost alarm installation immobilisers also safeguard your vehicle's price at resales, as it prevents thieves from selling your vehicle on the black market. This can be especially important for luxury cars, which are often unable to resell their value if they were taken away in the past. Ghost immobilisers do not leave any evidence of its installation, which means it won't alter the appearance or damage the engine in the event that it is removed accidentally.

It is easy to transfer the vehicle to a different vehicle

If you decide to sell your car, the ghost immobiliser install can be removed and transferred to your new vehicle which makes it one of the most flexible security devices on the market. The Ghost uses the CAN data network to communicate with the ECU and is completely silent. This means that it cannot be monitored or detected for a specific frequency this is a crucial feature for those who want to secure their vehicles from theft.

The autowatch ghost installer Ghost immobiliser is a revolutionary device that helps combat vehicle theft in the modern age. It prevents key cloning and other sinister methods employed by professional thieves to steal vehicles. The system is activated within 3 or 30 seconds (depending on the vehicle) after the ignition is switched off and remains active until the owner is able to enter in a PIN sequence (4-20 button clicks based on the model). The gear-box lock will also prevent your vehicle from moving while the engine is running if you have it.

This is the first security device designed to fight the most recent methods of keyless vehicle theft. GHOST utilizes the CAN data network to connect to the ECU of your vehicle unlike other immobilisers that use radio frequency. It is also completely silent. This makes it unnoticeable to thieves who may be watching for the distinctive signals or frequencies that could identify other immobiliser systems.

It is also not able to be identified by sophisticated RF scanning or code-grabbing technology which can identify the type of security system is installed in your vehicle. It is also impossible to disarm because it doesn't require keyfobs or radio frequencies. The GHOST is also compatible with a variety of vehicles and includes an emergency backup code that makes it more secure.

The GHOST can be used in conjunction with a tracker to stop the vehicle from being taken away in the event of a theft. This is a great tool for those who are interested in customising their cars or buying expensive or rare ones. Insurance companies are increasingly demanding ghost immobilisers on all keyless entry cars. This can lead to lower monthly costs.

Change the PIN code easily

The Ghost immobiliser from autowatch ghost installers midlands is a revolutionary device that guards your car against key cloning and hacking. It is connected to the CAN network of your vehicle and allows you to design an unique disarm sequence. This must be entered to allow the car to be used again. This is similar to the way the PIN code functions for credit cards. You can change the pin any time.

The ghost system can be set up discreetly and leaves no visible marks on the interior body of your car, making it harder for thieves to detect and tamper with. It is able to be transferred to another vehicle without any issues. This is an enormous benefit for anyone planning to sell their car in the future.

You can change the PIN code of a ghost immobiliser in only a few steps. This is a simple process that should only take a couple of minutes. It is important to first ensure the vehicle is heated and the battery is fully charged. You should also be aware that this procedure will disable service mode, and you must enter the PIN code before using the vehicle again.

Once you've changed the PIN code, you should test it in a secure environment. This is an important step to ensure that the device is working correctly. Turn on the ignition, and then press a few keys on the steering, doors, or the centre console. The ghost will display an array of LEDs to show the correct sequence to disarm. When you enter service mode, it will stop the engine from starting, allowing you to test the system.

A ghost immobiliser is the ideal choice for vehicles that are frequently abandoned. It can be utilized with a range of vehicles, including motorhomes vans and ride on lawnmowers. It comes with a variety of additional features, including mechanical protection and anti-hijacking equipment. This technology is a great addition to the security of your vehicle and can reduce your insurance rates. Many insurers require this device to be fitted on vehicles that have keyless entry to help reduce the growing risk of theft.