Patio Door Lock Repairs

Over time, the wear and tear could cause lock malfunctions. There are a few simple steps you can take to restore the security of your uPVC door.

These simple fixes can make your home safer no matter if you adjust the lock or clean the mechanism.

Clean the Lock

While patio doors are a great option to let in the outside and keep out the elements, they can also be a security risk in the event that your lock isn't operating as it should. Over time, wear and tear, extreme cold and hot weather, dirt and debris can affect your patio door's lock and make it difficult to open. Fortunately, with a little maintenance you can make sure that the locks on your patio door lock repair near me door always function effectively.

To begin with, it's essential to clean the lock on your patio glass repair door and all of its moving parts. This will help remove any dirt and coatings that could hinder the lock from working in the way it should. Start by wiping down the moving parts of the lock for your patio door with a damp, clean cloth. then make use of a scouring pad, or a rough damp cloth to scrub the hard-to-reach parts of the door and frame that are ingrained with dirt. Then, wipe the lock down using a dry towel to get rid of any remaining moisture. Let it air dry before using it.

If you have a patio door that uses pin tumbler latch mechanisms You can apply lubrication to the lock by applying graphite powdered to the key or by using an lubricant based on Teflon such as WD-40 Multi-Use Product. This kind of lubricant can be applied quickly and does not dissolve over time. If you are unable to locate a suitable lubricant, you might try using a pencil that has a thick tip. Insert the pencil into the lock and jiggle it around to spread the graphite.

Tracks for sliding patio doors require regular maintenance to ensure that they're free of dust, dirt, and debris. They are particularly susceptible to snow and ice, which could cause them to jam or bind which makes it difficult for your patio doors to open and close.

Tracks for sliding patio door repair service near me patio doors and rollers can be cleaned by removing any damaged or dirty weather stripping, cleaning them, then replacing it. Patio door rollers can also be cleaned and sprayed with a nonstick lubricant.

Lubricate the moving parts

uPVC French doors, like sliding patios, are operated with 3 to 4 or occasionally 5 points locking mechanisms. This includes the lock cylinder and handle that is operated by keys. These doors require maintenance, oiling of the moving parts. This can be accomplished with an oil that is thin but not WD40. This should be done at least once a year.

If sagging hinges aren't a cause, the door could be misaligned and caught or striking the strike plate hole within the frame. The solution is to remove the strike plate and use an abrasive chisel to increase the size of the mortise it sits in. This will allow the latch to fit into the hole, and prevent it from hitting the frame.

Take a measurement of the length of the cylinder using the help of a piece of book or wood that can be inserted into the gap above the adjustment screw. The outer dimension is measured from the outside of door to the center of cylinder. The inner dimension is measured from the center adjustment screw to the end of the cylinder.

Check the width of the lock.

If your glass patio door repair door latch is hard to turn even after cleaning and oiling, it's possible that it's not aligned properly with the strike plate. Examine if the door is balanced and whether the hinge screws are secure, but in many cases it is possible to move the strike plate upwards or downwards can fix the issue.

The latch may not be able to engage properly in the event that the strike of the lock is not large enough. In this instance, you'll need to enlarge the opening using either a hammer or chisel, and then test the latch to ensure that it connects to the strike plate smoothly without rubbing against or catching on the door's frame jamb.

Before buying a replacement lock, it is important to determine what kind of mortise lock you currently have. This can be done by looking at the end faceplate and determining if it is round or square. Then, look at the screw holes on the current lock and note the size of each one. This information will allow you to find a replacement lock that is exactly the same width and will fit in the hole you have already.

In addition to identifying the mortise lock that is currently in use, you'll also need to check it for any scratches or bends that may require repairing. A bent or damaged latch is more likely break than one that's been utilized often, so make sure to replace the lock with a new, secure version in the event you notice any signs of wear or damage.

Once you've checked the lock and determined which kind of replacement you require, it's time to start working on the actual repair. Remove the handle and spindle from the patio door, and then put in the new one. Begin by installing the handle inside and aligning it with the spindle and then fixing it by using the two bolts or screws which hold it. Once the interior handle is in, install the handle on the outside and screw it into the position as well. After you've completed these steps Test the handles to make sure that they can be shut and open easily and that the latch works properly with the strikeplate.

Check the Strike on the door.

The strike plate and the door latch are two parts that work together in order to lock the door. A misaligned strike plate or door latch will result in the latch not being able to latch the door in a proper manner. This problem is usually very easy to fix.

Check the receiving holes of the strike plate to ensure they are clear of obstructions such as dirt or plastic plugs. Loosen the keeper screws holding the strike plate. This allows it to move horizontally, but it will not be able to separate from the frame. Then, you can adjust the strike plate to ensure that its receiving holes align with the latch hooks on the door latch. Once the strike plate is adjusted tighten the screws, and then test the door to see whether it shuts easily with the new adjustment.

These plates are difficult to reach for homeowners who have sliding patio doors. However, they are essential to secure and unlock your door. These metal plates are usually located at the top and bottom of the door jamb where they serve as the door's latch. The door latch is able to slide into the strike plate to create an airtight seal when closed. If the strike plate has been damaged or rusted, or if it is not installed correctly the latch may not be able to lock the door properly.

One of the most common reasons for a patio door repairs near me door lock to stick or not close is a misalignment between the latch and the strike plate. The easiest method to check for this is to perform the "lipstick test." Apply some lipstick on the edge of the deadbolt and attach masking tape over it. When you close the door, the lipstick will leave a mark on the tape, showing exactly where the latch connects to the strike plate. If the mark is too low or high you can easily adjust the strike plate.

If your sliding patio door locks aren't functioning properly they could be a problem in keeping your home secure from intruders. You need to fix this problem as soon as possible. By following these easy steps, you can repair the lock on your patio door and restore its functionality in a matter of minutes.