How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of unique steps to add an additional ignition key. It requires dealer service with an electronic handheld computer called Tech-2. Then it is necessary to purchase a new transponder. key are required to be purchased.

Rotate your keys to stop one from wearing out more than the next. This will also keep your keys in good condition.

replacement saab key Case

The new key fobs for keys are not like the older Saab keys. They're equipped with electronic devices that make them difficult to copy. This has made theft of cars considerably more difficult than it was years ago. It also makes it more costly to replace keys that were lost.

Every owner of a saab key programming 9-3 must have at least two working keys. If one of them is lost, it costs a lot to replace it in the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers usually charge between $100-$200 to complete this.

There are several ways to get around these expensive. Some parts dealers will search for the code from a spare key (usually the same one that opens the doors and switches the ignition) and cut a brand new metal key blade for just a fraction of dealer cost. The key must, however, be the same as the original one to function properly within your car.

Follow these steps to replace the case. You will need to have an open-faced screwdriver and a lot of patience. With the screwdriver, break apart the plastic, and then take off the emergency key. Once you have the case opened, take out the electronics and put them in your new case. Be sure to put the correct badge and key back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is an inexpensive part that can be easily and quickly replaced. This YouTube DIY video user Cyclone Cyd explains how to replace the battery of the remote key fob in just four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure may differ slightly.

The button is normally located just below the Saab logo on the back of the fob. It's usually near the Saab 9-3 Key Programming logo on the back of the fob. Then take a flathead screwdriver into the small hole in this button. This will allow you to open the fob's case to allow you to replace the battery.

After the new battery CR1632 is in place it is possible to reassemble the remote key fob and program it to your car. The entire process should not take more than an hour. This is a simple process that doesn't require any special tools.

If you lose a key, the procedure will be a bit more involved but it is still able to be completed. The dealer will have to determine the VIN of the car and then order a new key blade and TWICE module, both with the proper unique code. After that, they'll have to cut the new key and then program it using an innovative software tool called MDI.

Replacement Key Fob

The key fob is the device that locks and unlocks your car, it has an internal battery. The batteries have a lifespan and eventually die. It's a common issue with all cars. The good news is you can replace the battery on most key fobs without having to replace the entire case. You can purchase replacement fobs on Amazon that come with all the electronic components already installed, which means you can simply open the case and replace the old batteries. It is important to note that you'll need to remove the emergency key first. you can do this by putting the screwdriver of a small flathead into the slot that is located in the middle of the case. Move the screwdriver around the case, and it will split open, making it simple to remove.

If you're planning to replace your keys, be sure to have a spare available. This will save you lots of money. If you have an extra key, you can request the dealer to cut the key and program it for your car. This is less expensive than purchasing a new key fob.

If you don't have a spare, it is possible to add a second key to your car, but this will require a lot of research and effort. The cost of adding a second key is about a few hundred dollars and it also requires the programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

Contrary to earlier Saab automobiles, the current SAAB 9-3 models use a much more sophisticated alarm system that is dependent on a coded keys. If you lose your primary key, it could be expensive to add another one since the car needs to include a computer and also be programmed to accept a brand new key. Even dealers can charge hundreds of dollars to program an additional key when they are not able to complete the task.

If you've lost your sole working key the dealer will replace your car's computer (known as the CIM or saab key programmer TWICE) to create an exchange, and they will charge a premium for it. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for an additional key, which will save you more than 50% of the price you be charged at a dealership.

If you've owned a Saab 9-3 Key Replacement 9-3 for quite a while and you're aware of the ignition keys are not very durable. They can become incredibly sticky and the buttons can fall off from time to time and you should think about purchasing a new one if yours isn't working as it should. The good news is that replacing the ignition key isn't as difficult as it sounds, and it can be done fairly quickly with the proper tools.