Choosing the Right Window Handle For Your UPVC Window

Choosing the right window handle is essential to having a properly-fitting uPVC window. You'll require a design that is not only practical but also complements the style of your home.

The process of changing a uPVC window handle is very simple. It only takes some time and the following tools.

Metal

The metal window handle can be a nice touch and is an essential piece of hardware to increase security in your home. A variety of metal window handles are available, which can be fitted to a variety of frames and materials. Some handle designs are created specifically for sash window to make opening and closing the window more convenient and less likely jam. If you are seeking a more secure option, there are also several locking mechanisms designed to block the window from opening beyond a certain level.

Espag handles are perhaps the most well-known type of window handle used on UPVC windows. These have a mental spindle on the back which is fixed to the window frame and drives the window mechanism. Both UPVC and aluminum windows have them.

Cockspur handles are found on older UPVC window frames. These handles are more difficult than modern Espag handles as they utilize a traditional peg locking mechanism.

For a sleeker look, there are also cam handles available. These handles for double glazed doors have a refined edge, and are made to work with other kinds of uPVC window. They are suitable for tilt and turn windows where it is possible to open the window from the bottom while still permitting the top to be opened.

When choosing new metal window handles, it is crucial to consider a number factors, including the step height and the direction in which the handle can be turned. The first refers to the distance between the underside of the handle nose and the base of the screw plate, while the latter refers to the direction in which the handle will be able to turn. For instance, some Handles For patio doors only rotate clockwise, while others are anti-clockwise.

Plastic

There are a lot of varieties of plastic window handles. All are designed to operate windows and protect them from intruders. They can be installed on either uPVC or aluminium windows and come in a variety of styles and colours. Some windows are also designed to include a lock. This increases security and allows you to open the window while being secure from intruders.

Window handle problems can arise in a myriad of circumstances. Sometimes, they might not be able turn properly. This can be caused by dust entering the mechanism, causing dirt or a blocking. Another common problem occurs when the window handle begins walking tightly or clings to something. This is a sign that the window handle needs attention.

When this happens, it's important to call a specialist. They can assist you in resolving the issue quickly and efficiently. They can also give assistance in replacing a window handle made of plastic with a new one that will work better and more reliably.

Most manufacturers will use the exact same fasteners, no matter what type handle you have. It's therefore easy to change the window handle and lock using a exact match.

When you're trying to find the ideal replacement handle, it's important to be aware of your window's size and design. This will help you find the right handle that will fit your windows perfectly and won't cause problems. Also, ensure that you be aware of the length of the spindle - this refers to how far the handle extends beyond the base. This is crucial if you plan to utilize a window handle that has an encapsulation.

Casement

Casement windows are hinged on top and bottom like awning windows. However, they open in a horizontal direction to the left or the right, instead of vertically. They are easy to maintain and offer a stunning view of your yard or garden. They also let fresh air in. They're a popular option for new construction, and can also be a great addition to the architectural appeal of older homes. However, over time they may become difficult to open or close because of worn hardware or stripped gears. In certain cases the window expert may need to replace the entire crank mechanism.

Casement windows, also known as awning windows, typically have a roto-gear and crank system that allows the window to be closed and opened but also include the ability to lock to keep the sash in place while closed. The window lock on a casement works in conjunction with the bezel locks on the frame to close the window. Many people tend to overtighten the operating handle on the casement windows. This can cause the locking mechanisms to operate against each with windows to become tangled and not open or close properly.

It's also common for the window crank handle to get worn out over time. This could happen if the window has been shut and opened repeatedly for an extended period of time. This can also occur when the window is being used as a prop while it's open, causing its operating handle to rub against the crank shaft and gears.

Fortunately, replacing a casing or window crank handle for awning is a simple DIY window repair that could save you money in the long term. The first thing you'll have to do is locate the trim mounting screws that hold the casement cover in place (Photo 3). Once you've unscrewed the screws then you'll be able to remove the old handle and examine the inside of the crank mechanism. The gears can be lubricated again, but if they are already damaged, you might have to replace them.

Cockspur

Cockspur handles are typically found on older uPVC windows, as well as timber and aluminum. They are key locking, easy to operate and provide an effective barrier against cold and noise from outside. The handle opens to the outside when you press the lever. The cockspur nose closes over the wedge striker inside the frame and seals the window. By replacing both the handle as well as the wedge of the cockspur, you will improve the efficiency of your double glazed windows handles-double glazed window handle windows and security.

These replacement cockspur window handles are available in left and right hand options and work by turning them 90 degrees. They come with a small 'spur' that presses against the PVC wedge on the window frame to provide an extremely secure closure. The handles are easy to install and are available in a variety of styles, including white, satin chrome, and PVD gold.

It can be difficult to measure the backset on an cockspur, especially when you are replacing a handle that was previously used. This handle was designed to solve this problem and features 3 packers of different thicknesses which can be fitted on the underside of the handle nose to create a variety of backset step heights, including 9mm, 13mm, 17mm and 21mm.

The Schlosser Technik Apto is a high-quality replacement cockspur with flexible screw fixing centers. It is suitable for many applications between 9mm and 21mm. It is also easy to install with key locking and is available in various finishes.

This cockspur handle is designed to fit tilt and turn windows but not side-opening casement windows (which utilize a separate pivot and tilt). It can be used to replace old or damaged handles on uPVC or aluminium frames by using rivets rather than screws - the only difference being the method of attachment. You will require a rivet gun and rivets to fit this handle to the window frame you have.

Espagnolette

The locking mechanism of your uPVC window is the shootbolt or espagnolette lock. They are commonly found in older homes and provide both aesthetics as well as security. Espagnolette handles are available with key-locking or non-key lock mechanisms, and are available in both inline and crank designs. They can be straight or curved. The key-locking push button offers additional security by preventing the handle from being pushed open from the outside using an extremely long screw driver that is stuck between the frames. This is a common way of committing burglary!

GB DIY Store offers a variety of espagnolette handles. Each one comes with a different spindle length which protrudes out from the back of the handle, so when you are looking to replace your espag handles, it's important to determine the current handle's spindle length to ensure you receive the right size replacement handle. After you've determined the length of your spindle on your current handle, look through our range of espag handles to find the ideal style for your windows.

We stock a fantastic collection of white uPVC inline espagnolette handles that come in key-locking and non-key locking options. You can pick from a variety of colours and spindle sizes to match your new door handles with the frame of your window or décor. The espagnolette handle collection includes modern and contemporary styles as traditional designs. Each replacement handle comes with five different magnetic spindle lengths that can be swapped between 15mm and55mm, making it easy to fit the handle to your window without the need to purchase the exact size of screw!

A clever rosette on the back of the rose makes sure that the spindle can be inserted using the left-hand lever or right-hand lever. This will prevent any mishaps. A metal spindle insert also helps to secure the handle of the espagnolette in place, and the handle is held firmly in place by a clever 'click-fit' mechanism that is activated when the handle is turned by hand to produce an audible click'.