Choosing the Right Window Handle For Your UPVC Window

The proper Window Handle Replacement handle is crucial for a properly installed uPVC. You'll require a style that is not only practical, but also complements the design of your home.

It is simple to change it is easy to change a uPVC handle. All you require are the tools listed below and only a couple of minutes of your time.

Metal

The metal window handle can be a beautiful accent as well as an essential piece of hardware that can increase security at home. There are a range of metal window handle options that can be adapted to various frames and materials. Some of these handles are made specifically for sash windows to make closing and opening the window more convenient and less likely to jam. If you are seeking a more secure option, there are several locking mechanisms that are designed to stop the window from opening beyond a certain point.

Espag handles for internal bifold doors are the most recognised type of window handle used on UPVC windows. They have a mental spindle in the back, which is attached to the frame of the window and drives the window mechanism. Both UPVC and aluminum windows come with them.

Cockspur handles are another popular type of window handle typically found on older UPVC windows. They can be more difficult to use than modern Espag handles since they are based on the traditional peg locking mechanism.

For a more sleek design, there are also cam handles that are available. These handles have a sleek edge and are designed to work with many other types uPVC window. They are suitable for tilt and turn windows, where it is possible to open the window from the bottom, while allowing the top to be opened.

When selecting new window handles, it is crucial to take into account a variety of aspects that include the step height as well as the direction in which the handle will be turned. The first refers to the distance between the handle's underside nose and the base of the screw plate while the latter is the direction in which the handle will be able to rotate. Certain handles can only rotate in only one direction, like clockwise. Other handles can only rotate in the opposite direction.

Plastic

There are a variety of window handles made of plastic. All are designed to operate a window, and then secure it from unwanted invaders. They are available in a variety of colours and styles to fit uPVC and aluminium windows. Some are also designed to include a lock. This gives added security and lets you leave the window open, while still keeping it safe from intruders.

Window handle issues can occur in a wide range of situations. Sometimes, they might not be able turn properly. This can happen due to dust getting into the mechanism, blocking it or causing dirt. Another problem that can be observed is when the window handle starts moving in a tight manner or is clinging to something. This indicates that the window handle is in need of attention.

It is crucial to speak with an expert when this happens. They can assist you in resolving the issue quickly and efficiently. They can also offer advice on replacing a plastic window handle with a new one that will work better and more reliably.

The majority of manufacturers utilize the same fasteners, irrespective of the type of handle you're using. It's therefore easy to replace the window handle and lock using the exact model.

It's important to determine the size and style of your window prior to you look for a replacement window handle handle. This will help you find the perfect handle that fits your windows perfectly and won't cause problems. Also, make sure to keep track of the spindle's length that is the measurement of how far the handle's extends from the base. This is essential when you are planning to utilize a window handle that has a restriction.

Casement

Similar to awning windows, casement windows hinge on the top and bottom, but they open to the left or right rather than opening up vertically. They are also less messy and provide a great view of your backyard or garden, while also letting fresh air in. They're a popular option for new construction, and they can also add an architectural feature to older homes too. Over time, they can become difficult to open or shut because of worn-out equipment or worn out gears. In certain cases window specialists may need to replace the crank mechanism.

Casement windows, also known as awning windows, typically have a roto-gear and crank mechanism that allows the window to be opened and closed however, they also have a locking mechanism to keep the sash securely in place when closed. The window's lock works in tandem with the bezel frames to secure the window. Many people overtighten their casement window's operating handle. This could cause the locking mechanisms to work against one and cause the windows to bind and not close or open properly.

It's also typical for the window crank handle to get worn out over time. This can occur when the window was shut and opened repeatedly over a prolonged period of time. It could be a problem when the window handle repairs was used as a prop when it was opened which caused the handle to be pushed against and damaging the crank shaft or gears.

Fortunately, replacing a casing or awning window crank handle is a simple DIY window repair that could save you money in the long term. The first thing you'll have to find the screws used to mount the trim that hold the casement cover in place (Photo 3). After you've removed the screws and removed the screws, you'll be able remove the old handle and inspect the inside of the crank mechanism. Gears can be relubricated however if they're already stripped, you might need to replace them.

Cockspur

Cockspur window handles are found on older uPVC or timber windows. They are simple to use, lock with the use of a key, and also provide an effective barrier against noise and cold from the outside. The handle opens outwards when you pull the lever. The cockspur nose then closes over the wedge striker inside the frame which seals the window. Replacing both the handle and cockspur wedge striker can make double-glazed windows significantly more efficient, and also increase security.

These replacement cockspur handles are available for left and right-handed windows. They are operated by turning them 90°. They are fitted with an'spur' which presses against the PVC wedge that is attached to the frame of the window to create a secure closure. The handles are simple to install and come in various finishes, including white, black, satin chrome and PVD gold.

Measuring the backset of a cockspur handle could be difficult, especially if you're replacing an existing handle. This handle was created to address the issue. It has 3 packers with different thicknesses that can be placed on the underside of the handle nose.

The Schlosser Technik Apto is a premium replacement cockspur, with flexible screw fixing centers. It is suitable for many applications between 9mm and 21mm. It is also easy to put in with key locking and is available in various finishes.

This handle is ideal for tilt and turn windows, but it will not work with a side opening casement window (these require an additional tilt and pivot). This handle can be used to replace damaged or worn out handles on uPVC and aluminium frames using rivets instead of screws. This handle can be affixed to your window frame using a rivet gun.

Espagnolette

Espagnolette window handles, also referred to as espagnolette locks or shootbolts are the locking mechanism that connects to the multi-point lock system within your uPVC windows. They are commonly found in older homes and provide both aesthetics and security. Espagnolette external door handles and locks are available with key-locking or non-key lock mechanisms and come in both crank and inline designs. They can be straight or curving. The key-locking push button offers extra security since it prevents the handle from being pushed open from the outside using a long thin screw driver snagged between the frames - a very frequent method of burglary!

There is a huge variety of espagnolette handles available from here at GB DIY Store. It is important to measure the size of the spindle of your current espag handle prior to purchasing an alternative. After you have measured the length of the spindle of your current handle, browse our selection of espag handles to find the right style for your windows.

We have a great selection of white uPVC espagnolette handles with key locking and non-key locking options. You can pick from a variety of colours and spindle sizes to make sure that your new handles match the frame of your existing window or décor. Our espagnolette handle range includes modern and classic designs and contemporary styles. Each replacement handle comes equipped with 5 interchangeable magnetic spindle sizes ranging from 15mm and 55mm, so you can easily attach the handle to your windows without needing to purchase the correct screw size!

A clever rosette in the back of the rose makes sure that the spindle can only be inserted using a left-hand or right-hand lever. This helps prevent any accidents. A spindle made of metal is used to secure the handle of an espagnolette. The handle is held in place by an ingenious 'click-fit mechanism' that is activated by turning the handle with a finger and revealing an audible "click".