Add Warmth to Your Home With a Fireplace Wall Mount

A fireplace wall mount can add warmth and ambiance to any space, whether in your home, office, or commercial space. These wall mounts are typically easy to install and include mounting brackets for either hanging or recessing into walls.

Follow the steps on the website of the manufacturer for a quick, easy installation. Check that the wall-mounting bracket and the bottom of the fireplace are able to fit together, then fix it to the wall.

Size

A wall-mounted electric fireplace can be a focal point within an area that provides warmth and atmosphere. These units are available in a variety of sizes that can be adjusted to fit into any space. A smaller unit would be ideal for a bedroom, while a larger one could be used in a family room or living room. Certain models have recessed options for flush installation against the wall to create an aesthetically pleasing appearance.

The height of a fireplace wall mount can affect how it looks within the space. For dramatic effects most people prefer to place them higher on the wall, typically 6 to 12 inches off the ground. Others prefer to place them at the normal TV height of 4.5 to 5 feet that allows the fire to be seen from a variety of seating positions in the room.

No matter what size you decide to go with it is important to consider a few aspects to take into consideration to ensure that your fireplace is safe and efficient. It is recommended to keep all combustibles at a minimum of three feet away from the fireplace, including furniture, drapes, and other things. In addition, you should ensure that the brackets for mounting are secured to the studs, if they are. If you are unable to locate studs, you can use anchors made of plastic. This will ensure that the fireplace will not be pulled out.

Another important factor to consider when selecting the right fireplace wall mount is the amount of heat that it produces. As a rule, choose one that produces around the same amount of heat as an ordinary electric heater. If you follow this advice you can be sure that your new fireplace will be able to provide enough additional heating for the entire room.

Certain fireplaces come with special features that make them stand out from other fireplaces. Some fireplaces come with remote control operation and adjustable settings for brightness, and no-heat mode. They also feature cool-to-the-touch glass and realistic-looking LED flames. Other noteworthy features include a built-in shelf to hold electronic devices as well as an easy, no-professional installation procedure.

Installation

A fireplace wall mount, in contrast to an electrical fire that must be hard-wired into the electrical system of your home it is semi-permanent. It can be mounted directly on a wall, or into a bracket which is then attached to the wall. It is essential to choose a location close enough to an outlet that it will allow the power cord reach it, while still allowing for sufficient clearance from other objects. This is in line with the manufacturer's recommendations in the owner's manual.

Plug it in and experiment with the LED lights and settings prior to when you begin the installation. This will let you know whether it is ready for installation or if it needs to be checked further.

Make sure you have the area ready for where you plan to install your fireplace mount. Based on the model you purchase, this might involve installing a bump out on the wall or covering the wall with drywall. In the latter case, use proper drywall methods like tape and mudding. Let it completely dry before continuing.

After the walls have been prepped and the bracket is secured to the wall with screws. The brackets should be screwed into the studs that are behind the drywall. This will stop the fireplace from coming loose from the wall in the future.

When the bracket is secured, it is time to put the fireplace in itself. The style of fireplace will vary however, there will always be a ledge where the fireplace sits and a spot to attach it to brackets that are on top. Then, you can add any additional media like logs or embers.

Alternatively, some models allow you to fit the screen and firebox together on a wall bracket. This can make installation much easier but you must check that everything is tight and is properly fitted prior to completing.

Once the fireplace has been installed, you can finish the look by tacking or screwing the bracket on the wall and trimming the wires. If you want, you can also paint the wire covers that disguise your power cord.

Safety

A fireplace wall mount is a convenient method of heating your home without occupying floor space. It is crucial to take security measures when using this type of fireplace. The first step is to ensure that the unit is grounded to prevent electric shock. Make sure you read the instructions provided by the manufacturer for proper usage.

Although it is possible to find wall-mounted electric fires which don't produce any heat, the majority have a heater to increase the realistic and ambiance the flame effects. It's typically a fan-forced heating element that blows air over the heating element. Certain models also feature an infrared source of heat.

After the fireplace has been installed, it is vital to avoid touching the hot surface. This could cause burns or damage to the unit. To minimize the risk of fire keep combustibles no more than three feet away from the fireplace. You should also be careful not to block the vents on the back of the fireplace.

There are a few other safety features to be a lookout for when selecting the wall mount for your electric fireplace. For instance, you must be sure that the device comes with an emergency shut-off feature to prevent overheating and fires. It's also a good idea to choose a model with a lower output of heat, as it will save you energy.

The material of the surround is also important. Select a material that is safe for pets as well as children like wood fireplaces veneers, steel, or glass. You should also select an item that has a display or remote control to make it easier to operate.

There are many kinds of wall-mounted fireplaces, such as electric and ethanol fire. The ideal fireplace for you is determined by your budget and the home's style. No matter if you opt for an electric or ethanol Fireplace - planetaufa.ru -, you can be sure that it will add warmth and elegance to your home. Be sure to follow the safety instructions provided by the manufacturer and keep your pets and family members secure when using this fireplace.

Style

The design of a fireplace wall mount determines how it will look on the walls of your home. Some models are made to stand out, and others blend in with the decor of your room. For example, a modern model like the Streamlined wall-mounted electric fireplace has a the sleek front glass design and a minimalist design. It features top venting that lets heated air flow freely while keeping the fireplace’s stylish design. Its flat mount as well as the easy-to-use remote make it simple to operate.

There are also wall-mounted electric fireplaces with mantels with a more traditional design. These are great for homes with existing open hearths or those looking to convert a wood-burning firebox into an electric fireplace without chimney. Flat-wall fireplaces come in various dimensions, and often have a shelf to display decorations. They're a great option for bedrooms, living rooms and even home offices.

Gas wall-mount fireplaces are also a great option for those looking to create a warm, inviting atmosphere in their home. They are equipped with a traditional log-set and are available in a variety of frame finishes including black and natural stones. They also come with an ember bed that can be customized and LED flame colors for personalization. Certain models have a TV mount built in to provide additional functionality.

Certain models are designed to be hung directly on the wall, while others can be recessed or completely into walls. The Allusion wall-mount fireplace is small in size which permits it to be installed into frame walls of 2x6. You can, however, add a trim skirt to the exposed part. The Allusion comes with a convenient remote and a variety of heat settings so you can enjoy the fireplace all year long.

Surface-mounted electric fireplaces typically project 4" to 6.5" into the room, so they're more straightforward to install than fireplaces that are built into the wall or constructed from a wall cavity. They're also an excellent choice for those who don't want to endure the hassle of drilling holes into their walls. You can simply remove or reposition the fireplace when you move.