In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

An in wall fireplace provides an elegant and polished look without the cost of a mantle. It is one of the most simple electric fireplaces to set up.

There are a few things to think about before buying your in wall fireplace. Follow these guidelines to get the most of your purchase.

Height

Although it might seem like a simple question but determining the height of your new fireplace is one of the most important decisions you make. The height of your fireplace will influence everything from how it will fit into a space to its visibility. A fireplace that is to high could make it look unnatural and detract from the aesthetics of the piece. On the other hand, having your fireplace set too low could cause it to disappear in the wall space.

Electric fireplaces can be erected at different heights. For instance, a majority of people prefer to place their fireplaces at eye level from a seated position. This usually requires a height of 40-42 inches from the floor to the bottom of the marble fireplace. Some people place their fireplaces under their TVs, which is a visually appealing option.

However, the size of your fireplace will depend on several factors, including the size of the room and the length of the wall you want to mount it. The bigger the room, the larger it can be. This could mean that you are in a position to fit a bigger fireplace in it. The same goes for the length of the wall, since a longer wall can accommodate a fireplace that is larger.

Another crucial aspect to take into consideration is how you intend to make use of your fireplace. If you plan to use it for decorative purposes, a shorter size will be the best. If you intend to use it to heat your house, you will need to make sure that the fireplace is sturdy and tall enough to withstand the safety standards.

It is important to choose the proper height for your fireplace, so that it is in line with your decor and is easy to clean or fill. It is always a good idea to ask a professional fireplace installation expert to assist you if aren't sure what height you should choose. They will be able to suggest the ideal height for your fireplace based on their experience and your unique home.

Depth

It is essential to know the depth of a fireplace if you intend to put it in an recessed position. If you plan to cut your wall, make sure that you have enough space to accommodate the inner design of your fireplace (the smoke shelf area above the fireplace, the flue that runs through the roof, and the fireplace itself). You should also consider the space you'll need for the surround, and whether or not you want a mantle.

Many of the more recent electric fireplaces have the depth of being almost hidden, giving them an "integrated" look. This kind of electric wall fireplace is best demonstrated by the Panorama BI Deep series. The model has an 5.8-inch depth that lets the user see the flames and ember bed instead of the frame of the freestanding fireplace. It also comes with a variety of media packages, such as natural-looking driftwood logs that look like driftwood, white pebbles, or crystals made of clear glass that reflect the flames and enhance the ember bed.

Gas wall-mounted fire places are also available in shallow and deep models. But, when deciding the depth of your fireplace it is crucial to remember that these fireplaces function as a supplemental heat source and must be properly vented by a skilled professional. The length of the vent pipe, the length of the flue and the distance from the stove to the vent are all elements that must be considered when determining the depth of a gas fireplace.

It is crucial to read and follow the instructions of the manufacturer when mounting your fireplace. In most instances, hiring a professional to install your fireplace is highly recommended. It is also recommended to have an additional person in the event of installing gas fireplaces.

The addition of an in-wall fireplace space to your home is a fantastic way to add value to it and create ambience. It also can help reduce your heating bills. Moreover, it is an excellent option if you aren't able to install a traditional fireplace in your home because of space constraints or due to the location of an existing chimney.

Surface Mount

If you're unable, or prefer not to cut through your wall or build out an area to accommodate an electric fireplace, a surface mount gives a sleek and modern look. Some models, such as the Allusion line, can even be installed partially recessed into a wall without compromising aesthetics or heat output.

To start the installation process, determine the location where you would like your fireplace to be located and make a mark using a pencil on the wall where the bracket will be installed. Utilize a stud finder to locate the studs in the area, and ensure that each mounting bracket will be in front of one or more studs to ensure stability. If a stud is not in reach or doesn't work for your fireplace, you can use anchors for the drywall to support the mounting bracket.

After you have determined the position of the mounting brackets on the wall and then use a power drill to screw them in and make sure they are properly aligned with the studs. You can use studs or plastic anchors to connect each bracket. Once the mounting brackets have been installed, lift the fireplace and hang it from the bracket. When the fireplace is positioned be sure that it is level.

Before proceeding with the installation, plug in your fireplace and make sure that all features are working correctly. Turn on the fire and light up the flames, play around with the heat, ember bed lights and more. Once you are satisfied with the result, it's time to put in the floating mantel.

Depending on the model of your fireplace, you'll either require a wire connection to the appliance wire connector on the lower part of the mantel. Or, if your fireplace has slots or hooks on the back, connect them to the slots on the wall mounting brackets. Once you've done that then, refer to the owner's manual for specific instructions for removing the glass front panel and installing it into the opening.

Once you've removed your front panel of your fireplace and placed it in its opening, follow your manual's specifications to finish the install by replacing the glass front and adjusting the height if required. If your fireplace is equipped with ember bed media, spread it across the top grate to give it a more natural look. Secure it using the included screws.

Plug-In

These fireplaces with electric technology do not require chimneys or vents as do traditional wood-burning ones. Plugged into a standard outlet they provide supplemental heating to rooms that are up to 400 square feet. You can also adjust the ambience with a variety of flame and heat settings. Some models come with LED lighting effects that highlight the ember bed and the fire. Others include the top grille grate which hides manual controls but easily pops open to reveal buttons for your preferred setting.

Plug-in electric fire places can be installed directly on the wall or recessed to give a built-in appearance. These units are usually simpler to install than mantel stone fireplaces. Some have a pedestal base to permit you to put the fireplace on a flat surface like buffets or dressers. A remote control, mounting hardware and log set are also included. These electric fireplaces can include flame and heat options that can be shut off to provide a warm and cozy atmosphere.

Some models feature privacy glass which can be changed in a flash from fully transparent to partially transparent. This option makes these models popular for walls that separate common spaces for entertainment, such as dining and living areas. They can be even used in bedrooms where adding a new fireplace is an affordable way to take the chill off an area without compromising privacy.

Plug-in electric fire, mouse click the next web site, places don't need to be hardwired, but they must be plugged into a wall capable of supporting their weight. Some models include an accessory kit to make this process simpler by providing a pre-wired power cord and a bracket for mounting. This kit is available for either drywall or concrete installation.

When deciding where to put your wall-mounted electric fireplace, ensure that it's near an electrical outlet. Based on the model the plug-in electric fireplaces can be plugged into outlets that are connected to the same circuit, or a separate one for your electric fireplace. It is suggested to choose a different circuit to ensure that all other appliances in your home be powered by the same voltage. This could trip your breakers.