Ghost Immobiliser Problems and Solutions

Cars are expensive items that we save years for. For this reason, it can be very depressing when your dream car is stolen.

If you've installed the ghost immobiliser by a recognised fitter like Car Theft Solutions, it will stop thieves from taking your vehicle in a matter of minutes.

1. No Stop/Start

The autowatch Ghost immobiliser installation Ghost CAN immobiliser has been designed and developed to be one of the most effective security systems available. The system works by using the buttons on the steering wheel, the centre console and pedals to enter an encrypted pin code within the vehicle's system. It will then disable the engine. This stops thieves from stealing your vehicle even if they have the fob or keys.

The Ghost is equipped with security measures to guard against the device from being hacked by thieves or bypassed. This includes CAN-BUS blocking and an immobiliser cut. When combined with an insurance-approved marking system, the odds of your car being stolen are nearly nonexistent.

This system also works with your vehicle's factory-installed immobiliser to provide an additional layer of security preventing the thief from starting your car even when they have your key or fob. This protects the value of your resales and keeps your family members safe.

If your ghost has stopped functioning, it could be an indication of other issues that are not Ghost related. Enter valet or service modes on your Ghost to test this. This will remove your Ghost from the vehicle, and you should be able to start your vehicle. If you're not able to accomplish this, it could be a problem in your ghost alarm installation installation.

It is not recommended to try to eliminate ghosts on your own unless you have the expertise. You are dealing with a sensitive and intricate system that controls your engine. This can cause damage if handled incorrectly and is extremely risky. We recommend you call the installer for assistance.

2. No ignition

Immobilisers are used in modern cars to prevent the vehicle from starting if the key isn't compatible with the one programmed inside. This works by transmitting a transponder code from the key to the immobiliser which then compares it to the codes contained within it. If the codes match then the engine will be able to start. This system can fail for many reasons, including a lost or missing key or transponder that is damaged or one that is not coded, or electrical issues like a damaged immobiliser antenna wire that is a part of the ignition cylinder. Multiple keys can also cause confusion with the codes, such as a spare or a vehicle with two transponders in the same key.

If the immobiliser doesn't function properly, it could be difficult to start your vehicle. This creates the impression that the system is inoperable and they may steal the vehicle with the joy and pride of the owner. This is why it's an important investment for anyone who owns a car particularly those with prestige vehicles that are difficult to sell after being damaged or stolen.

The ghost immobiliser can be concealed in nearly any part of your vehicle, making it virtually undetectable by car thieves. It makes use of buttons on the steering wheel, door, or the centre console to create an unique PIN code that only you know. This makes sure you are the only person to drive your vehicle. It doesn't have LED indicators and is silent and therefore thieves will not even notice it's there. The Ghost is TASSA approved and Insurance Approved, meaning it can be installed by an approved installer and help to protect your pride and joy from hacking and key cloning.

3. No engine start

With car theft increasing dramatically in recent years, and keyless entry vehicles being especially vulnerable to theft, it's no wonder that people are seeking an additional layer of security. One of the best ways to achieve this is to install a ghost immobiliser. This patented device shields your car from theft and damages by using the most innovative technologies available on the market today.

The Ghost is a brand new security system, unlike traditional systems that rely on key fobs and LED indicators. It is based on an exclusive pin code sequence that only you can identify to start your car. The device is connected to your vehicles CAN data network, and then programmed to protect it using buttons on the dash and steering wheel. The device will not allow the engine to start until your pin code is entered first. It's done quietly, no clicking like other systems. It is nearly impossible for burglars to recognize.

If needed it can also disable stop/start eco mode. This will be done differently on every vehicle, but it is typically as easy as stops or locks the gearbox in P. This can be done with or without the activation of the anti-hijack.

Ghost immobilisers are extremely efficient in protecting your vehicle and can work with any key, or even a spare. It can stop all kinds of theft, including key cloning and hacking, and ECU swapping. It can also stop vehicle damage by detecting vibrations or the tampering. A ghost immobiliser can also safeguard the resale value of your vehicle by making it less appealing to thieves, and is definitely worth considering.

4. Keyless entry is not possible.

The last thing any car owner would like to experience is having their pride and joy stolen. You may have spent years saving for your vehicle or perhaps you own an expensive vehicle that you are proud to display. Being faced with the loss of a car is a depressing experience, regardless of whether you've put money into it or not. Luckily, with the right security measures in place, you can secure your vehicle from sophisticated thieves.

Ghost 2 immobilisers, unlike wheel locks or Faraday bag can be fitted in your vehicle discreetly without causing any damage. They will only allow you to start your car if the unique code is entered correctly. This pin code is chosen by you and can be altered at any time you want. The device also functions differently on every vehicle, so thieves won't even know it's even in existence.

Ghost II connects to your vehicle's CAN system. It communicates through the data loop of the CAN. This means it is not able to be identified by thieves using scanners using RF or code grabbing. It isn't able to be re-enabled by simply adding a key or replacing the ECU because only the right pin code will allow your Lexus to begin.

Our TASSA accredited Ghost 2 immobiliser is insurance approved and will give you peace of mind knowing that your vehicle is safe from theft that is not a contactless process. This will not only assist you how to become a ghost immobiliser installer recover any losses that might be incurred due to theft but will make it harder for potential thieves in the future to purchase your vehicle since they will be aware of the security system that prevents theft. This could save you thousands of dollars on resales.

5. No alarm

ghost immobiliser install immobilisers are an electronic device that is technologically advanced and installed in your vehicle to stop it from being taken. It prevents your vehicle from being stolen by preventing the engine from starting until you enter a pin-code sequence that you know.

This is a fantastic security device that can be used to prevent theft. Unlike an alarm for your car or a wheel lock, a ghost immobiliser can't be cut off or spoofed. It can also be used to jump start. If a thief attempts to steal your car using this method, he will discover that the vehicle will not start and he'll be forced to drive away without it.

Car theft has become more sophisticated, which means that technology has needed to be improved to stop thieves from stealing your joy and pride. This is why it's crucial to safeguard your vehicle by installing an immobiliser that is ghostly. They're not only affordable but also extremely effective in protecting your vehicle.

They're discreet and hardly noticeable therefore a burglar won't be able to see them at all. The device can be used in conjunction with a car tracker, so you'll know exactly where your car is, and ensure it's secure.

The Ghost CAN immobiliser was the first aftermarket CAN bus lock. It is designed to protect against key hacking or cloning and key theft. It's also TASSA-certified, which ensures its security. The device will install itself into your vehicle in a hidden location, works silently, has no radio signals, and is unnoticeable to the naked eye. It is cheaper than a typical car alarm and will do more to deter thieves from stealing the vehicle in the first place. This will give peace of mind, and make your vehicle more secure than it was before.