UPVC Window Handle Replacement

Replacing a damaged window handle is a relatively easy process, and, with the right tools, it can be done quickly. However, it is essential to identify the type of handle and its spindle length before buying a replacement.

Older uPVC windows have cockspur window handles which have a spur that protrudes to the lock of a wedge cockspur striker plate. These can be either left or right-handed and must be to be matched when replacing.

What kind of lock and handle do I have?

There are many different types of window handles made of upvc and locks, each with their own benefits and purposes. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism works as intended. With time and regular usage, the window handles made of upvc may become damaged or worn out, rendering them less effective and secure. In some cases, they may even disappear completely. If you notice that your upvc window handles have fallen off, it's important to fix them as soon as you can. This will help avoid burglaries and keep your home safe.

It's an easy task that almost anyone can do. With a few basic tools and the proper knowledge it's a straightforward procedure that shouldn't take less than a few minutes. It is important to know the type of handle or lock that you have on your window. This will allow you to choose the appropriate replacement.

Inline Espagnolette Handles

These are the most common kind of upvc handle and are typically located on the other side of your window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles also have a spindle that goes through the middle of the handle and then into the frame of the window to activate the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and feature an distinctive hook-shaped design. Cockspur handles are fitted with a single screw that holds the handle to the frame of the window and aren't as secure as other types of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles because they can be turned to open the window and then lowered into the window to allow air circulation. They have a 7mm spindle on the back and are available in right-hand and left-hand versions.

It is essential to know the size of the spindle when purchasing a replacement handles made of upvc. Not all are the exact same size. To determine the length of your upvc handle, simply drop something in the middle of the hole, and then measure the distance it travels before it reaches an obstruction. This is the longest spindle length that will fit in your window.

What is a spindle?

uPVC window handles function similarly like doors, turning the handle to open a latch inside the frame. The window is then opened and closed. However, in some cases, the handles may become damaged, especially if they are regularly used or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC window if they're not able to operate it correctly.

There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. This is why it is important to know the type of handle is installed on your uPVC window so you can find the right replacement.

You can check what type of uPVC handle you are using by inspecting the base of the handle. A snap-in cover is over the screw that holds the base of the handle in position. Once you remove this you will be able to see the second screw that holds the handle base in position. Once both screws are removed you should be in a position to pull the handle away from the uPVC window.

Once you have removed the uPVC window handle, you will need to carefully remove the spindle you have removed from the locking mechanism. Make note of the length of the spindle as you'll need to ensure that you buy one that is the same length as your original handle and locking mechanism.

The main issue with most window handle problems with uPVC is that the spindle gets worn out and cannot longer work with the locking mechanism. This could be due to corrosion, damage from frequent use, or the locking mechanism becoming looser. If this happens, you'll have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC windows glasses replacement.

How do I get rid of my old handle?

Through time and regular usage, window handles could become damaged or broken and if this happens it is important to repair them as soon as you can to ensure the safety of your home. Fortunately, replacing a damaged or worn handle is a relatively easy task that can be accomplished in less than one minute and doesn't require any specialist tools.

The first step to remove the handle that was previously used is to remove the screw located on the top of the handle base. Once the screw is removed, the handle can then be removed from the base section. There is another screw located at the bottom of the handle base, and this can be removed as well. After both screws are removed the handle can be removed completely from the base section of the window.

After removing the old handle and align the fixing holes of the new handle to the holes already present in the window frame. There might be a small sticker or caps on the new handle, so take them off them if needed and then put the handle in place. Once the handle is in place it is important to test whether it functions by turning the handle and making sure that the lock mechanism activates.

Espag handles have spindles that extend from the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows have an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have a long nose that is able to hook over either the frame's outer or transom bar cross-member within the window.

Once you have the new handle in place, you can insert the spindle inside the lock inside the window and then tighten it down. When the handle is fixed, replace the'snap in' cover and screw cap (if necessary). The handle is now ready for use, so try opening and closing the window a few times to make sure that it functions correctly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't a big deal and the process is actually very simple. All you need is a screwdriver and a little bit of patience. The first thing you need to do is make sure that the old handle is not locked and then remove any screws that are visible. you can also replace them by screw caps if you need. After removing the handle and you are ready to take an note of the length of the spindle which protrudes from the back of the handle. This is crucial since it will determine the type of handle you'll need to purchase.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle is inserted into the handle to control the locking mechanism in the window frame. When the handle is turned it releases the latch on the double glazed window replacement and allows it to open. During regular use and over time, handles made of espagnolette can be damaged.

Cadenza handles are a kind of uPVC handle that is usually employed with tilt and turn windows glass replacement near me. They feature an extended blade that works an interlocking mechanism that is multipoint within the window. They are more secure than the espagnolette handle as they can only open from the inside. They can be replaced with the same procedure as espagnolette handles however you must ensure that the new handle has an angled blade, as opposed to a flat one.

Once you have determined the right handle to purchase You can simply align the new handle with the screw holes and then screw it in the appropriate position. After that, you should put the screw covers back on and test that the new handle is working properly. You can accomplish this by moving the handle back and forth from the locked position to the unlocked a few time. If you encounter any issues, it might be beneficial to speak with a professional to see if they can assist you in solving the issue. They can provide advice on how to fix the issue in a quick and effective manner.