Replacement UPVC Door Handles

Whether you're replacing your handles or want to add a bit of extra security, you'll find the right handle for your door. These handles made of upvc are easy to install and have the minimum 92mm centre distance of multipoint locks.

The backplate's fixing centre as well as the keyhole/lever dimensions are the most important measurements. Compare these measurements carefully with your existing marks before ordering.

Lever/Pad

Lever pad door handles consist of an elongated lever handle on one side and a paddle-shaped handle on the other. They are intended for use with key wind locks. However they can be affixed to multipoint split spindle door locks.

After you have picked the correct handle for the doors the finishes will be listed in the drop-down menu. Not all styles of handle are available in every finish and you should always look over the sizes and technical drawings for the specific product that you are looking to ensure that you can get the correct size and fitting.

When selecting a new set of upvc lever pad door handles it is important to ensure that they match the PZ (distance between the spindle of the handle and the center of the hole for the cylinder) of your existing multipoint locks, as these need to be in line to ensure that the doors remain locked, either from the inside or outside. The handles we offer are designed to work with most standard cylinder locks, however you should always double glazed door handles-check before making a purchase.

You'll need to take off the handles on your current handle and remove the lock case if upgrading to dual spindle handle levers since this will require a split inline cylinder. You can purchase these separately. We have included a diagram of the technical aspects in the images of each product.

It is recommended to loosen the screws that hold your existing door handle and then check the mechanism. If the screws are too tight, you may need to loosen them even more. Then, you can remove the spindle from the door handle and replace window handles it with a new Upvc handle. Before putting the handle in the frame, it is recommended to check that it is in the proper place. You can do this by inserting your finger into the gap between the door frame and the handle to ensure that it is level.

Lever/Lever

Lever door handles (borderbrown3.Bravejournal.net) operate with a multi-point lock that utilizes a Euro cylinder and can be found on most double doors made of aluminium, upvc doors, and some wooden doors. They feature a lever inside and a paddle on the outside and are generally available in two varieties. Sprung - These include an internal spring cassette within the backplate that helps to bring the window handle upvc lever into an upright position. Non-sprung - they do not have a spring mechanism, and will need to be manually pulled to bring the handle lever to the horizontal position.

To fix the door handle lever that is sliding you'll need to locate the detent access pin or hole. This is usually small, protruding ring, or rectangle, found on the handle base plate. Once you've located it, you can loosen the set screw using a screwdriver and take it off to allow the lever and return it to the horizontal position.

Once the handle is in a horizontal position, you can re-install the screws and tighten them so that the handle stays secure on the base plate. It is also recommended to apply an adhesive that locks the screw threads to increase the grip and prevent them from loosing over time.

Drooping lever door handles can be caused by many factors. The most common reason is that the fixings are over tightened, and are putting pressure on the lever bearing which causes it to become a bind on the door face. It could also be due to the fact that the levers aren't being operated at a straight angle and this is causing compression of the latch mechanism preventing it from fully springing back into action.

A common cause of spring levers that are not functioning correctly is the spring not being in the right position on the backplate. To determine if the handle returns to its horizontal position, simply turn it.

If your door handles are loose it is important to identify the issue fast, as this could lead to excessive wear on the screws and possibly to the handle falling off the base plate. It is recommended to tighten all screws that are loose on a regular basis, as this will help to prevent them from loosening.

Lever/Snib

These upvc door handles are also known as handle sets with a 'Snib' and have a snib lever on the top of the lever that can be pressed down to lock your door in the event that you don't use an dummy lock. These door handles are fitted with a Fullex lock 68PZ. (68mm between the spindle and lock centre). We also carry a selection of other 68PZ door handles from manufacturers such as Ferco and Fab & Fix.

You can make your home more modern by changing your door handles whether you are replacing existing handles or installing new ones on doors that you constructed. There are a variety of styles of door handles made from upvc available that include traditional levers on backplate, straight or curving short latches and knob handles that resemble dummy knobs for multi point locks that are perfect for French doors.

Lever on backplate handles are often rectangular in shape, however there are also circular or oval shaped versions that are referred to as rose door handles. These kinds of door handles are equipped with a lever or knob on a backplate which is placed behind the knob or lever and is sometimes referred to as a rosette, although certain back plates can be detached to allow for concealed fixing.

These handles are available in a variety of finishes, including coloured and chrome finishes, to be matched to your door and hardware such as knobs, hinges and bolts. Some handles have a an grub screw that can be used to connect the knob or lever to the spindle. Some handles are equipped with bathroom spindles, which can be used to make bathroom locks. They also come with an release mechanism that turns the thumb and can be used on doors for bathrooms.

Mortise

The tubular latch is the most likely to be the cause of this in the event that your door handle is stuck open. This could be due to a number of things, but the most common is a lack of lubrication in the latch plate. This can be resolved easily by opening the door and spraying lubricant on the handle and lock. Alternatively, it could be that the latch plate has become dislodged from the backplate. This can be a bit more complicated and will require a specialist to fix it.

A multipoint handle is the best solution for stuck door handles. These handles mount through the faceplate of the door and are operated by an actuated thumb turn knob or key that triggers an electronic cam that locks the deadbolt. The handles are available in a variety of sizes that will fit various types of uPVC doors and come in a variety of attractive finishes to complement the existing hardware. These handles are available online or from a local locksmith. They are easy to install and come with clear directions.

To select a replacement handle set, you'll need to determine the PZ dimension of your cylinder. This is the distance in millimetres that lies between the outer edge of the door frame and the center of the hole in the handle. You'll also require the type of lock on your door, irrespective of whether it's a mortise or hook lock. Once you know these measurements, the easiest method to determine the right handles is to filter by brand on the website. This will help you narrow down your options, and then you can choose the correct size.

A typical handle set includes the handle unit comprising two screws of different lengths, drill guides and installation instructions. The smart models, like the Igloohome Smart Mortise 2+ includes an entire mortice lock that has a built-in keypad. These are more complex models and are ideal for professionals who install them or competent DIYers. Some handle sets come with many accessories, like weather strips, which can be used to improve the appearance of the door.