Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window replacement hinges isn't as complicated as you may think. It is crucial to ensure that the arrow on the hinges are facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm on the open frame.

There are several kinds of hinges to pick from, each one with distinctive features. This article will go over the most popular uPVC hinges, as well as their advantages.

Egress/Easy Clean Hinge

They are an excellent choice to replace or upgrade a fire escape safety window, as they open at a full 90-degree angle. They can also be removed to an easy clean position, allowing you to easily access the outside of windows to clean them without climbing an overhang or climb a ladder at potentially dangerous angles.

Yale is one of the most trusted and well-known brands in the home security industry. These hinges can be used with any type of uPVC side hung window. They can be moved into the easy-to-clean position by pressing in a small button and then moving the window sash to one side. After closing, the window sash will revert to its original position.

They are available in both 13mm and 17mm stack heights. Based on the size of your window we recommend using our Egress Selection Guide to determine which product is best for you.

These hinges are designed to be used with a standard side-hung frame, either uPVC or aluminium. They are fitted with an easy-to-use friction screw to adjust the amount of resistance that is generated. This allows for easier opening of the window and reduces the risk of a mishap during strong winds. They have been tested for over thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

There are no buttons or catches the Nico Egress Easy Clean Friction Hinge is simple to use and provides a convenient solution for emergency egress and secure cleaning. Press the hinge retention clip located on the inner corner of the bottom corner. This will release both the bottom and top catches which will allow you to move the sash into the easy-cleaning position. Close the window after you have the sash in an easy-cleaning position. This will reset the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as "Easy Clean" hinges are used to replace side opening windows for escape (fire safety) reasons. These hinges permit a larger opening in the event of fire. The building regulations state that this kind of hinge must be installed in any space that is habitable and has windows.

The windows feature a friction stay that allows the windows to open up to 90 degrees. They also allow the opening sash to slide over the glass when it is opened and allows for easy cleaning without the need to use ladders. The hinges aren't flimsy buttons or catches, and are operated with a simple, secure lever that is accessible from the inside of your home.

The hinges, manufactured in the UK by Cotswold, come with a child safety restriction for everyday use. It can be reverted using a hidden button. You'll have peace of peace of mind knowing that your children will not accidentally open the windows too wide. The stack heights are 13mm or 17mm.

To purchase these hinges, take a measurement of the length of your current side-hung window hinge which is fixed to the frame (see the guidelines for measuring the length of your window hinges made of upvc). Then, select the appropriate size hinge from the choices below.

It is important to note that the measurement is taken from the part that fixes to the frame Tilt And Turn Window Hinge Covers not the sash. The real hinge length could be longer or shorter depending on the manufacturing process of your old windows. When choosing the size of the hinge, most frames made of upvc will have a stack height of 13mm however if your original window frame measures 17mm, you should select this option. You can also utilize the 4mm packer in order to make up the difference. All the hinges are supplied in pairs (1 left and one right). The hinges are not equipped with screws. If required, these can be purchased separately. Our upvc window hinge window repair screws are highly recommended. These screws are designed to enhance the performance of your hinges and allow them to operate efficiently for a longer. They have a lower friction hinges for upvc windows design and a better weather seal with a new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These restricted child safety friction hinges help to overcome this issue and offer a fantastic solution when ventilation is needed but access for cleaning or escape in the event of fire is not possible. They restrict the amount of opening the sash, and allow for the bypass of this restriction by pressing an appropriate button. They can be used for side and top-hung casement windows hinges and come in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction Hinge blends the characteristics of a standard restrictor as well as an escape hinge to offer an effective and simple way to comply with building regulations. It is available in 13mm and 17mm stack heights and can be used on both top and side opening uPVC window. It is supplied in a pair, where one hinge is the restricted egress and the other unrestricted allowing one of these to be installed to the lower part of the sash, while the other is fitted to the top.

These uPVC restricting hinges have been tested to BS6375 Part 2. They are intended to be used on windows that cannot be fully opened like a small children's bedroom. The mechanism limits how far the sash opens up to 100mm in a safe distance and then it re-engages after the window is closed.

Like the other types of uPVC friction hinges, these can be used on any type of window and are suitable for difficult to access windows above the ground three-storey flats, or those that would normally require a ladder to reach them. These can be enhanced by our security enhancements, such as hinge guards, or dog bolts, to achieve PAS 24 performance.

It is crucial to take measurements of your existing window hinge to ensure that you get replacements that are the same size. The easiest method to accomplish this is by looking at the hinge in the image gallery and working out the location you would like it to be positioned. Top hung hinges can be restricted on both sides, while side hung hinges can only be used on one side.

Standard Hinge

A standard hinge has metal-to-metal contact and no extra parts to reduce friction. It's available in a variety of finishes and is also fire-rated. To determine the radius of your hinge lay it flat and line up a dime and quarter in two corners. If the quarter is more snug then the corner should be turned to 5/8 inches.

The right hinge can be the difference between making or breaking your door's appearance. The style and finish of your hinges with your door will create an attractive and cohesive appearance.