Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be modified up to 20 times. This will then allow your vehicle to start.

Simple PIN code Change Process

With the rising rate of vehicle thefts, many owners are seeking to improve their security. There are a variety of security gadgets that are sold aftermarket including tracking systems, alarms and immobilisers. However, not all of them are equally effective at protecting your vehicle. While a tracking system may assist you in locating your car in the case of theft, it will not prevent the crime from occurring in the first instance. Immobilisers, on the other hand is exactly what says on the tin: it disables the engine of your car to prevent it from being started. The Autowatch ghost immobiliser installers near me is one of the most sophisticated options available, making it almost impossible for thieves steal your car.

The ghost device uses the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to start. This can be done via the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This feature is particularly useful when you need to give your car away to a valet service or parking because the immobiliser will remain activated, but not disabled.

The Ghost is a very unique and ghostinstallations - https://Calhoun-mosley.thoughtlanes.net/ten-cost-of-ghost-immobilisers-that-really-change-your-life/, innovative device that works in conjunction with buttons of your car instead of being a separate unit. It's not just an effective deterrent to vehicle theft and vandalism, but it can also be used on any future vehicles you may own. This makes it a better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your car from key cloning and hacking. It also stops ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be fitted into the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which are a typical technique that car thieves use to bypass immobilisers.

The benefit of using CAN data is that it operates in a silent manner when compared to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technologies, nor can it be detected by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console, or door panels, to create unique sequences for disarming. You can even create a sequence that is as long as 20 presses to provide additional security. The iPhone app only allows one connection, with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It is able to be operated temporarily in the Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can hand your car to a valet or service without needing to enter an entry code.

Tested for each vehicle

The Autowatch ford focus ghost installer is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to prevent your car from operating normally until you enter a custom code. The system can be turned on or off via your smartphone's app, without the need for extra wires.

Standard factory immobilisers in vehicles function by using a transponder inside the key that sends an indication to the ECU. If the correct code is sent the car will begin however if the transponder is replaced with one from a different vehicle, the immobiliser will not recognise it. This enables the vehicle to be started and stolen. A South African company that is at the forefront of safety systems technology developed the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way thieves could take your car is by physically towing it away and even then they would not be able to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk, steering wheel and door panels to create an individual, changeable PIN code sequence that needs to be entered before you are able to use your car. This is done without additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code-grabbing technologies to detect that the system has been set up.

Ghost is more difficult to get rid of than car alarms, which require disarming using the buttons. This makes it an excellent addition to a GPS tracking device which can be used to track your vehicle after it's stolen.

Emergency PIN code override

You don't need to look far on social media sites to find stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the car without the original keys.

The Ghost immobiliser has been specifically designed to prevent this, and give you an extra layer of security to prevent your vehicle from being targeted by thieves. It works by creating an unique pin code sequence that is triggered by your buttons on the steering wheel, door panel, and the centre console. The unique pin code is entered in conjunction with your original key fob in order to prevent the engine from starting. The unique PIN for override can be found on the black card you will receive after installation. It is simple to remember since there are no LED indications.

The device is hidden in the vehicle's wiring and does not emit radio signals, which means it cannot be recognized by thieves with diagnostic software that can recognise what type of security system you have installed. This makes it a great alternative to a tracker.

Contrary to most security systems that use a relay in the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependant). This allows them to block a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker with these systems, however this must be specified before installing the device. They are also fully service/valet-mode compatible and a great alternative to a tracker when you have your car checked for repair at the dealer.

Service/Valet mode

In recent years, there has been a increase in vehicles stolen without the owner's keys. It is more easy than ever to steal your pride & joy thanks to the availability of key cloning tools and door lock picks. To stop this, we have launched the autowatch ghost installation birmingham Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your car has been hijacked.

It communicates directly with your car's ECU (Engine Control Unit) via the data loop called CAN. It's completely silent as it doesn't utilize radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also protects you from introducing an ECU or key to bypass the system as only the PIN code allows the engine to be started.

The device is hidden inside your car and is accessible via buttons on your steering wheel, centre console, and door panels. A unique and reversible PIN code sequence up to 20 digits must be entered before you can start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being driven away or started without a PIN code being entered first. If the device is armed and you attempt to drive away, it will display an indicator on your dash that will flash on a regular basis for approximately 300m. If you enter your PIN code during this time, it will disable the anti-hijack device and your car will continue to operate in the normal way. If you don't enter your PIN in this moment, the indicator will continue to flash and will require a new PIN every time you attempt to start your car.