Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized item from theft. It is discreet and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be altered up to 20 times. This allows your vehicle to start.

Simple PIN Code Change Process

With the rising rate of vehicle thefts, many owners are seeking to improve their security. There are a myriad of security products that are available including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your car. A tracking device can assist you in locating your vehicle in the event of it being stolen however it cannot stop the crime. An immobiliser, on the contrary is exactly what says on the tin: it disables the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your car ghost immobiliser.

The ghost device utilizes the buttons on your car to create a unique sequence that must be entered in order for the engine to begin. This can be accomplished using the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This feature is particularly useful when you need to give your car away for valet parking or servicing because the immobiliser will still be activated, but not disabled.

The Ghost is a unique and innovative device which works in conjunction with the buttons of your car rather than as a separate device. This means that it is not just a powerful deterrent against vehicle theft but also a transferable device to any future vehicles you may own, making it more of an investment than traditional steering wheel locks.

Small device that is weatherproof

The Autowatch ghost immobiliser tracker immobiliser is a high-tech security device that protects your car from key cloning, hacking and ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be installed in the vehicle without the need for additional wiring and has been thoroughly tested to make sure it works with all vehicles. It also is resistant to jamming devices, which is an approach used frequently by thieves to get around existing immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The autowatch ghost immobiliser cost ghost does not produce LEDs, but instead utilizes the buttons in your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even make this sequence up to 20 presses long to provide additional security. The iPhone app is limited to one connection, using an individual pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost also stops car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine will only start if a valid PIN code has been entered. It is able to be operated temporarily in Valet/Service mode (with parameters set such as 30mph speed limit) and, therefore, you can offer your vehicle to an attendant or valet without entering a code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device is able to intercept signals and prevent your car from starting up normally until you enter a specific code. The system can be activated and deactivated using your own smartphone app without the need for wires.

The factory-installed immobilisers function by using a transponder that is built into the key. This transmits a signal to the ECU. If the correct code is sent the car will start however, install if the transponder is swapped with one from another vehicle the immobiliser will not recognise it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It guards you against hacking or key cloning and even key theft. Only by physically towing your vehicle away can thieves take it away and not be able to drive the vehicle.

Ghost utilizes the buttons of your car, such as the indicator stalk, steering wheel and door panels to create an unique PIN sequence that can be changed that must be entered before you can drive. This is done without additional hardware, like key fobs. It can take up to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, which means thieves cannot make use of sophisticated RF scanning or code grabbing techniques to detect that a security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is hidden within the vehicle, so it cannot be disabled or removed by thieves. It is also harder to remove than a car alarm that requires disarming using a button sequence. This makes it a fantastic complement to a GPS tracking device which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't need to look too far on social media to find stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow you to start your car without your original key fobs.

The Ghost immobiliser was designed to combat this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It creates an unique pin code push sequence using your buttons on the steering wheel, door panel and the center console. This unique PIN must be entered together with your original key fob in order to stop the vehicle from starting. The unique override PIN is on the black card that you will receive after installation. It's easy to remember because there aren't any LEDs.

The device is hidden within the vehicle's wires, and doesn't emit any radio signals, therefore it cannot be detected by modern thieves using diagnostic software that is able to recognise what type of security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

In contrast to other security systems, which have a relay in the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, however this must be specified before installing the device. They also work with service/valet modes and a great alternative to a tracking device when you bring your vehicle to the dealer for an electrical problem.

Service/Valet Mode

In recent years, there has been an increase in vehicles being stolen with the owners' keys. It is easier than ever before to take your joy and pride due to the availability of key cloning tools and door lock picks. To prevent this from happening, we now offer the Autowatch ghost immobiliser review immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your car has been hijacked.

It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, because it does not utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also prevents the addition of an additional key or replacing the ECU to bypass the system since only the correct PIN code will allow the engine how to become a ghost immobiliser installer start.

The device is hidden in your car and is reached via the buttons on your steering wheel, center console, and door panels. Before you can begin your car, you need to enter a unique and changeable PIN code up to 20 numbers.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car being started or driven away if a PIN code isn't entered before. If you're driving away with the device arming the indicator will flash on your dashboard and flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run as normal. If you do not enter your PIN at this point, the warning will keep flashing & will require a new PIN code for every attempt to start your car.