Pellet Stove FurnacePellet stoves are offered as freestanding units or fireplace inserts that can give your home the appearance of an authentic wood-burning fireplace. They are available as freestanding units or fireplace inserts that can give your home the appearance of a traditional wood-burning fireplace.
The auger transports pellets from the hopper to the combustion chamber, where they are ignited and generate heat. Sensors are used to monitor the fire and adjust the rate of operation to maintain your desired temperature in the room.
1. Energy Efficiency
Pellet stoves are a renewable, non-toxic fuel that is made from compressed sawdust and other substances. These are usually disposed of in landfills, but they can be used to provide a clean, efficient source of heat. They can help homeowners cut down on their energy consumption, and thus greenhouse gas emissions. Many homeowners who own pellet stoves report recouping their initial investment within just a few years, thanks to lower heating costs.
Pellets are extremely compressed and more dense than natural wood, which makes them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. They are also packed in plastic bags that seal out moisture, and require less frequent cleaning.
Like other heating systems pellet stoves need to be properly size and vented. A professional technician can evaluate your venting requirements and space to ensure the
best pellet stove inserts results.
During installation, the hearth is constructed to fit the space and the vent is installed through a hole that has been cut in the siding of your home. The vent can be positioned through a sidewall or a roof depending on your preference and local laws.
After the hearth and vent are finished and the stove is ready to be connected and turned on. Some manufacturers provide an electronic remote control that makes it easy to start and keep the fire burning, whereas others offer additional sensors that monitor airflow and combustion as well as flue temperatures and pressure. If the system determines that it requires more or less pellets, it signals the auger to speed up or slow down accordingly.
All stoves have a hopper for storage that holds from 35 to 130 pounds of pellets until they're required. Hopper capacities determine how often the stove needs to be filled with more hoppers, allowing longer intervals between refills. A grille draws fresh air from the room and then passes it through a heat exchanger, which then blasts heated air into the living space through convection. A auger, grate or other device distributes pellets and a pan beneath will collect any pellets that are not burned and also any combustion residue.
While pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized components require an electrical supply, which could be a problem during a power outage, even though backup systems are in place like batteries and generators.
2. Low Maintenance
indoor pellet stove stoves are incredibly efficient, but just like any other major heating appliance, they require some maintenance to ensure that they function properly. Regularly cleaning your stove's exhaust vents and the stove will stop the accumulation of harmful creosote which could cause an explosion, fire or damage to your stove or home.
A pellet stove burns natural wood pellets or other materials (like corn kernels, nutshells or small pieces of wood scraps). An electric-powered auger will feed the pellets from a fuel container into the burner and into the combustion chamber. The thermostat you set controls the rate at which pellets are fed to the burner. The fire can be kept burning or reduced or even snuffed out according to the temperature you set. When the fire is gone, the ash is dropped into an empty ash tin beneath the burner that can be easily removed and disposed.
Pellets are made from the waste products from lumber processing which could otherwise be thrown away. They are a renewable source and emit less particles than traditional wood-burning stoves, making pellet stoves a cleaner heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals emitted from pellet stoves is far lower than with newer wood stoves that have been certified by the EPA.
Due to the low emissions, these appliances don't require to be vented through chimneys as traditional wood stoves, however, they should be vented through a wall or an external structure.
pellet stove stores near me stoves have flue ports that are open at the top or rear of the appliance. They are connected to a vent pipe that extends outside of the home.
One drawback of pellet stoves is that you must purchase or store enough pellets to last through the winter season. Pellet stove owners typically consume three tons of wood pellets per winter, at a cost of $200 per ton. The costs can add up, but they are less expensive than buying firewood and transporting it to a fireplace or wood-burning stove. You should buy enough pellets to ensure your stove will run throughout the winter's coldest months. Also, you need to have a place to store the pellets (preferably cool and dry).
3. Reduce carbon footprint
Pellet stoves make use of renewable biomass fuel to create heat, reducing dependence on fossil fuels that are depleted. This helps reduce the carbon footprint and helps diversify the sources of energy used in homes.
Even the latest wood stoves that are EPA certified emit significantly less than
pellet stoves with thermostat stoves. The emissions of pellet stoves are also lower than those of gas furnaces. Pellets can be made of sawdust and bark as well as other lumber remnants. They may also contain soybeans, corn, or agricultural waste. When burned, they emit fewer particulates (leading to respiratory issues and allergies) carcinogens, carbon monoxide and nitrous oxides.
The main difference between wood stoves and pellet stove is the feed system. Pellet stoves are equipped with hoppers to store the pellets. When the thermostat or sensors signal that the room needs heating, the auger is turned and the pellets are fed into the combustion chamber, where they burn and produce heat. The air that is released from the combustion chamber moves through a heat exchanger that transfers the heat to the blower and then out into the room. This results in extremely low emissions and no creosote accumulation.
After the hopper is empty, a cyclone action removes the ash and places it in an ash pan. The stove also features fans to circulate the fresh, heated air throughout the living area. Most pellet stoves are made to be maintenance-free and come with a large view window that allows you and your family members to enjoy the flames.
The most significant aspect that affects pellet stove emissions is the quality of the pellets. Poor-quality pellets will produce more emissions. When selecting your pellets ensure they are certified as meeting certain standards and don't contain other ingredients like petroleum-based or urea-based substances. Also, look for a manufacturer who offers a warranty and will repair or replace any part in the event of a malfunction. Certain states provide homeowners with tax credits in the event that they decide to go even greener. This is a great way to offset the initial costs of this type of stove and make installation more affordable.
4. Reduced Noise
Pellet stoves produce a minimal amount of smoke or exhaust when compared to fireplaces with wood burning. A fan is employed to spread heat more evenly throughout the room. This feature is one of the reasons why pellet stoves require less maintenance than traditional wood stoves. While wood stoves require regular cleaning of chemical residues and particles to prevent their deterioration stoves can be cleaned using the use of a vacuum cleaner made of metal.
Many manufacturers have made an effort to create stoves that will be easy to install and operate as well as maintain. They also make their appliances in a variety of styles that will match the decor of your home. Certain models come with an app for WIFI, a remote control and thermostat that can be programmed.
Most pellet stoves come with a large fuel hopper which can hold between 35 and 130 pounds of pellets. The pellets are then fed to the combustion chamber by an auger. The speed at which the pellets are fed to the burner determines how hot the fire is and the heat output. The hopper can be filled with either hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). Many stoves are able to burn biomass pellets made from corn and switchgrass. This is a green option.
Because pellet stoves use a clean fuel, they emit less smoke than conventional wood-burning fireplaces and require fewer maintenance. They also don't require a chimney, which makes them a better choice for new constructions or retrofits.
Pellet stoves do not require regular cleaning of creosote or other chemical like wood stoves. They only need periodic inspections to ensure proper operation and maintenance. Based on the model, this might include a regular inspection and cleaning of the accumulated Ash or "clinker," as well as the motor and fans. Your appliance dealer can provide the proper procedures for your particular brand and model. He can also help you identify the right fuel for your stove and provide details on storage and safety.
